Truly the next generation of industrial UPS systems and commercial UPS systems, the Toshiba 4400 Series is a double-conversion, all insulated-gate bipolar transistor uninterruptible power system that features a digitally-controlled IGBT input rectifier, intelligent low harmonic pulse-width modulation of the output, and state-of-the-art electronic battery isolation circuitry.

Total front-access design requires zero rear-clearance and includes convenient features such as top, bottom, and/or side cable entry, standard sized air filter provisions, and lockable keyed doors. Small footprint and intuitive local touchscreen interface make it versatile and user-friendly, and it can be customized to your specific needs with such options as internal battery backup, internal transformers for specific voltage applications, and remote monitoring with the Toshiba RemotEye® 4 multi-protocol UPS.


Features & Benefits

  • Double-conversion, all insulated-gate bipolar transistor uninterruptible power system
  • Digitally-controlled IGBT input rectifier
  • Intelligent low harmonic pulse-width modulation of the output
  • State-of-the-art electronic battery isolation circuitry
  • Total front-access design requires zero rear-clearance
  • Top, bottom, and/or side cable entry, standard sized air filter provisions, and lockable keyed doors
  • Small footprint for ease of installation
  • Intuitive local touchscreen interface make it versatile and user-friendly
  • Can be customized with internal battery backup, internal transformers for specific voltage applications, and remote monitoring with the Toshiba RemotEye® 4 multi-protocol UPS.

Request a quote

 

Technical Specs

MODEL Model Number 4400X3X150XA 4400X3X200XA 4400X3X250XA 4400X3X300XA 4400X3X500XA 4400X3X800XA
Capacity 15 kVA (13.5 kW) 20 kVA (18 kW) 25 kVA (22.5 kW) 30 kVA (27 kW) 50 kVA (45 kW) 80 kVA (72 kW)
Topology True On-Line, Double-Conversion, All-IGBT Technology
INPUT Voltage (Standard) 208/120V Three-phase, Four-Wire + Ground Input*
Voltage Range -15% to +10% (Without Using Battery)
Power Factor > 0.98
Current THD < 5% at 100% Load
Frequency 50 ±5 Hz; 60 ±5 Hz
OUTPUT Voltage (Standard) 208/120 V: Three-Phase, Four-Wire + Ground**
Frequency 50/60 Hz, ±0.1% Auto-Sensing Standard. (50/60Hz Selectable, for
use as Frequency Converter)
Voltage Regulation ±2.0%
Power Factor 0.9 Lagging
Overload Inverter: 125% for 90 Seconds, 150% for 30 Seconds
Bypass: 125% for 10 Minutes, 1000% for 10
Milliseconds
BATTERY DC Link 288 VDC
Ripple Voltage < 0.5% DC
ENVIRONMENT Temperature Range 32° to 104°F (0° to 40°C)
Relative Humidity 5% to 95% Non-Condensing
Heat Rejection 4556
BTUs/Hour
6074
BTUs/Hour
7395
BTUs/Hour
9111
BTUs/Hour
15,186
BTUs/Hour
24,297
BTUs/Hour
Full-Load Efficiency 91.0%
25% Load Efficiency 88.8%
Altitude 3300 ft. (1000 m) Maximum Without Derating
Air Filtration Airflow Front to Top with Provisions for Front-Located Air
Filters
DIMENSIONS Dimensions 20.12″ (W) x 37.4″ (D) x
65.06″ (H) (511mm x 950mm x 1653mm)
32.1″ (W) x 31.8″ (D) x 73.6″ (H) (816mm x
807mm x 1870mm)
Weight*** 720 lbs. (326 kg) 1350 lbs. (612 kg) 1500 lbs. (680 kg)
COLOR O’Brien Black (Textured Powder Coat)
MONITORING Touchscreen Operator Interface, UPS Status N/O Dry Contacts,
RS232C Interface (Optional RemotEye® 4 Intelligent
Monitoring System)
OPTIONS Internal Batteries, Transformers, Dual-Input Feed, RemotEye® Intelligent Monitoring System, Remote Status Alarm Panel, Air
Filters
STANDARDS UL 1778, CUL, ISO9001, ISO14001:2004, ANSI C62.41 (IEEE 587),
NEMA/PET-1993, CE, IBC, & CBC (OSHPD)
WARRANTY 3-Year On-Site Warranty; 5-Year Warranty Available; See Toshiba
Warranty Policy for Full Details
SERVICE 24-Hour, 365-Day Technical Support: 1-877-867-8773
* Isolation and Auto Transformer
Options for Input Voltage Conversion
** Auto Transformer
Options for Output Voltage Conversion
*** Unit Weight Not
Including Internal Battery and Transformers
Specifications subject to change without
notice.

 

Industries & Applications

  • Critical network switching & processing equipment
  • Large-scale PLC controls
  • Medium-to-larger data centers
  • Hospital applications such as MRI, CT, or PET scanning equipment
  • Financial Institutions
  • Industrial applications
  • Pharmacological manufacturing

Request a quote

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

Designed specifically as an industrial UPS system for the specific needs of the IT industry, the 4300 Series boasts one of the largest input voltage/frequency windows in the industry, which extends useful battery life. Features include true online double-conversion, an input power factor better than 98 percent, and input current THD less than 3 percent.

Frontend IGBT design allows the 4200FA to work optimally from zero to 100 percent load with less than 3 percent THD on the input, allowing for generator single-sizing. Optional matching battery cabinet and maintenance bypass cabinet allow for sixty combinations of three-phase/three-wire and three-phase/four-wire input/output voltages. Comes with a standard three year warranty.


Features & Benefits

  • True online double-conversion
  • “Line up and match” ancillary equipment [transformer, battery, and MBS cabinets]
  • Zero rear-clearance required
  • Complete front-access design with top, front, and side entry
  • Local touch-screen interface
  • 90 percent output power factor
  • Input Power Factor > 98 percent
  • Input Current < 3 percent

Request a quote

 

Technical Specs

4300 Series
Model Model Number 4310F3F300XAXX 4310F3F500XAXX
Capacity 30 KVA/27 KW 50 KVA/ 45 KW
Topology True On-Line, Double Conversion, & All IGBT Technology
INPUT Voltage 208/120 V: Three-Phase, Four-Wire + Ground/Bypass Input; 208/120 V: Three-Phase, Four-Wire + Ground
Voltage Range 208 V, -20% to +15% (166 to 239 V Without Using Battery)
Power Factor > 0.99
Current THD < 3% at 100% Load
Frequency 50 ±5 Hz; 60 ±5 Hz
OUTPUT Voltage 208/120 V: Three-Phase, Four-Wire + Ground
Frequency 50/60 Hz, ±0.1% (Can be Used as Frequency Converter)
Voltage Regulation ±1.0% (0.5% Typical)
Power Factor 0.9 Lagging
Overload Inverter: 125% for 90 Seconds, 150% for 30 Seconds Bypass: 125% for 10 Minutes, 1000% for 10 Milliseconds
BATTERY DC Link 288 VDC
Ripple Voltage < 0.5% DC
ENVIRONMENT Temperature Range 32° to 104°F (0° to 40°C)
Relative Humidity 5% to 95% Non-Condensing
Heat Rejection 8153 BTUs/Hour 15,019 BTUs/Hour
Full-Load Efficiency 91.90% 91.10%
25% Load Efficiency 88.00% 88.80%
Altitude 6600 ft. (2000 m) Maximum Without Derating
Audible Noise < 65 dBA at 1m Air Filtration; Standard Front Air Filter
DIMENSIONS Dimensions 22.1 x 31.6 x 73.6 in. (73.7 in. (H) with Fan Cage)
Weight 788 lbs. 867 lbs.
COLOR O’Brien Black (Textured Powder Coat)
COMMUNICATION OPTIONS RemotEye® III & Ethernet/SNMP
OPTIONS Dual-Input Feed
STANDARDS UL 1778, ULC, CE, FCC Class A, ISO9001, ISO14001, ANSI C62.41 (IEEE 587), & NEMA PE 1-1993
WARRANTY Three-Years On-Site Warranty; Five-Years Available; See Toshiba Warranty Policy for Full Details
SERVICE 24-Hour, 365-Day Technical Support: 1-877-867-8773

 

Industries & Applications

  • Critical network switching & processing equipment
  • Large-scale PLC controls
  • Medium-to-larger data centers
  • Financial Institutions
  • Industrial applications

Request a quote

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

Noted for its versatility, and offering the largest input voltage/frequency window in the industry, the 4200FA Series is designed to be a high-performance state-of-the-art commercial or industrial UPS system suitable for use across a wide breadth of industrial UPS system applications.

Features include true online double-conversion, an input power factor better than 98 percent, and input current THD less than 3 percent. Frontend IGBT design allows the 4200FA to work optimally from zero to 100 percent load with less than 3 percent THD on the input, allowing for generator single-sizing. Proprietary technology lengthens battery life. The CT models feature internal batteries and maintenance bypass— without the need for additional cabinets. Comes with a standard three year warranty.


Features & Benefits

  • Largest input voltage/frequency window in the industry
  • Suitable for use across a wide breadth of industries and applications
  • True online double-conversion
  • Input power factor better than 98 percent
  • Input current THD less than 3 percent
  • Frontend IGBT design works optimally from zero to 100 percent load with less than 3 percent THD on the input—allowing for generator single-sizing
  • Proprietary technology lengthens battery life
  • Three year warranty

Request a quote

 

Technical Specs

4200FA CT Standard Specifications
Model Number
T42F3F150XAMBN
T42F3F250XAMBN
T42F3F300XAMBN
T42F3F500XAMBN
Capacity kVA/kW
15/12
25/20
30/24
50/40
Topology
True On-line, Double Conversion, IGBT Pwm, with Active
Input Power Factor Correction
Input Voltage
208/120 V, 3 Phase, 4 w + Gnd
Voltage Range
+10% to -30%; +20% to -30% online (without utilizing
battery)
Power Factor
Greater than 0.99
Current THD
Less than 3%
Frequency
50/60 Hz (Range 45 to 65 Hz)
Current Limit
115% Maximum
Output Voltage
208/120 V, 3-Phase, 4 w + Gnd
Frequency
50/60 Hz � 0.01% (Can be Used as a Frequency Converter)
Voltage Regulation
< 1% Balanced, 100% Load Step / < 2% Unbalanced,
100% Load Step
Overload (Inverter)
125% for 90 Seconds, 150% for 30 Seconds
Overload (Bypass)
125% for 10 Minutes, 1000% for 10 milliseconds
Battery Time (Full / Half Load)
9/26 Minutes
4/13 Minutes
3/10 Minutes
4.5/14 Minutes
DC Link
288 VDC
Ripple Voltage
< 0.5% DC
Environment Temperature Range
0 to 40� C (Operating) / -20 to +50� C (Storage)
Relative Humidity
0 to 95% Non-Condensing
Heat Rejection
8,988 BTUs
12,043 BTUs
14,451 BTUs
18,611 BTUs
Efficiency
82% AC-AC
86% DC-AC
85% AC-AC
87% DC-AC
88% AC-AC
89% DC-AC
89% AC-AC
88% DC-AC
Dimensions Dimensions (L x D x H)
20″ x 36.3″ x 59.7″
35.4″ x 37.6″ x 59.8″
Weight (lb)
900
910
915
2548
Altitude
6600 ft (2000 m)(Maximum without Derating)
Audible Noise
< 60 dBA at 1 m
< 65 dBA at 1 m
Features
Internal Make-Before-Break Maintenance Bypass Switch,
RS232 and Dry Contact Interface
Standards
UL 1778, cUL, NEC, ISO9001, ISO14001, ANSI C62.41 (IEEE
587), NEMA PE1-1993
Warranty
(See Toshiba Warranty Policy for Full Details.)
Service
7 x 24 Technical Support 1-877-867-8773 (1-UPS-TOS-UPS3)
rev 6/2010

 

Industries & Applications

  • Hospitals, clinics, and other medical facilities
  • “Lights-out” or “dark factory” manufacturing
  • Critical network switching & processing equipment
  • Large-scale PLC controls
  • Medium-to-larger data centers
  • Financial Institutions
  • Industrial applications
  • Pharmacological manufacturing

Request a quote

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

Widely used in hospitals, clinics, and other medical facilities as a UPS power conditioner with battery backup, the G8000 Series offers a high crest factor that’s ideal for MRI, PET, CT and other medical devices that have a high current inrush. The G8000 has a unity power factor output that provides 20 percent more energy than what’s typical of UPS systems from other manufacturers. It’s also 100 percent generator compatible, and its low input-current harmonics eliminate the need for an oversized generator.

Features & Benefits

  • Ideal for hospitals, clinics, and other medical applications where power protection is critical
  • High crest factor is ideal for MRI, PET, CT and other medical devices that have a high current inrush
  • Unity power factor output provides 20 percent more energy than UPS systems from other manufacturers
  • 100 percent generator compatible— low input-current harmonics eliminate the need for oversized generator

Request a quote

Technical Specs

G8000 Specifications
Model #
T80S3K08KK 6XS2H
T80S3K10KK 6XS2H
T80S3K15KK 6XSNH
T80S3K22KK 6XSNH
T80S3K30KK 6XSNH
Input
Rated Output Capacity
80 KVA/80 KW
100 KVA/ 100 KW
150 KVA/150 KW
225 KVA/ 225 KW
300 KVA / 300 KW
Voltage
480 VAC (+10% to -15%)
Frequency
60 Hz (+/-5%)
Configuration
3 Phase; 3 Wire + GND
Input KW
90 KW
110 KW
165 KW
247 KW
318 KW
( 102 KW Charging)
(122 KW Charging)
(181 KW Charging)
(270 KW Charging)
(319 KW Charging)
Power Factor
> 0.99 PF Lagging
Walk-In Function
EEPROM Upgrade
Maximum Input Current
108 A Normal
135 A Normal
200 A Normal
303 A Normal
396 A Normal
(125 A Charging)
(150 A Charging)
(222 A Charging)
(338 A Charging)
(401 A Charging)
Reflected THD
< 5% Maximum @ 100% Load
6% Maximum @ 25% Load
Bypass
Configuration
Three-Phase; Four-Wire + Ground
Voltage
480/277V (±10%)
Frequency
60 Hz (±5%)
Bypass Overload Capacity
1000% for One Cycle, 500% for Two Cycles
Battery Backup
Number of Cells
180
Type
Lead Acid (Contact Factory for Alternative Options)
DC Nominal
360 V
DC Minimum
288 V
Float Charge
405 V
Ripple Current (without batteries)
AC Ripple on DC Bus: < 0.2% of DC Voltage
Back-up Time
Application Specific
Max DC Charging Current
30 A
30 A
30 A
30 A
30 A
Max Discharge
305
375
566
840
1120
Battery Capacity Required for Full Load Output
88 KWB
108 KWB
163 KWB
245 KWB
323 KWB
Output
Voltage
480Y/277V
Configuration
Three-Phase; Four-Wire + Ground
Voltage Regulation
±1% for 0 to 100%Balanced and Unbalanced Loads
Voltage Adjustment Range
±5% (In Increments of 1V)
Voltage Unbalance
±3% for 100% Linear Loads ±5% for 100% Non-Linear Loads
Crest Factor
2
Transient Voltage Response
±2% Maximum with a 100% Step Loads (Without Utilizing Batteries)
±1.5% Maximum with Loss/Return AC Input
±2% Maximum When Load Transfers To/From Bypass
Transient recovery time
< 50 ms
Frequency
60 Hz
Frequency Synchronous Range
±0.5 Hz, ±1 Hz, + 1.5Hz (Selectable)
Frequency Slew Rate
1 Hz/Sec
Frequency Regulation
±0.01% in free running mode
Current
96 A
120 A
180 A
271 A
361 A
Power Factor
1.0 PF Lagging: 32 – 86 °F (0 – 30 °C) 0.8 PF Lagging: 86 – 104 °F (30 – 40 °C)
Overload Capacity
125% for 10 Minutes, 150% for 60 Seconds
Voltage THD
< 3% Max with 100% Linear Load/5% Max with 100% Non-Linear Load
Reliability
MTBF
200,000 Hours
Efficiency
@ 25% Load
83.9%
86.4%
89.6%
87.9%
88.8%
@ 50% Load
85.3%
90.1%
91.7%
91.0%
91.7%
@ 75% Load
90.0%
91.2%
92.3%
92.3%
92.7%
@ 100% Load
90.6%
91.0%
93.0%
91.9%
92.0%
Environment
Cooling
Forced Air
Paint Color
Sherwin Williams HHT2-7055, 079 Beige Texture
Weight
1390lb. (630 kg)
1740 lb. (789 kg)
2467 lb. (1119kg)
2980 lb. (1352 kg)
4575 lb. (2075 kg)
Weight (Shipping)
1440 lb. (653 kg)
1790 lb. (812 kg)
2556 lb. (1159 kg)
3069 lb. (1392 kg)
4725 lb. (2143 kg)
Floor Loading
171 Lbs/ft2 (1037 kg/m2)
214 Lbs/ft2 (1299 kg/m2)
203 Lbs/ft2 (991 kg/m2)
245 Lbs/ft2 (1196 kg/m2)
255 Lbs/ft2 (1245 kg/m2)
Dimension – Width
36.8 in. (935 mm)
55.1 in. (1400 mm)
76.8 in. (1951 mm)
Depth
32.5 in. (826 mm)
31.8 in. (808 mm)
35.7 in. (907 mm)
Height
79.2 in. (2012 mm)
79.4 in. (2017 mm)
Power Cable Access
Bottom Access
Top or Bottom Access
Top Access
Clearance Required
Top: 15.75″ (400 mm)
Front: 43 7/16″ (1100 mm)
Back/Left/Right Sides: Zero
Enclosure
NEMA 1
Heat Loss to be Removed @ Full Load
28,387 BTUs/Hour
34,222 BTUs/Hour
44,506 BTUs/Hour
68,240 BTUs/Hour
85,300 BTUs/Hour
Audible Noise
65 DBA @ 1m Typical
68 DBA @ 1 m Typical
72 DBA @ 1 m Typical
Operating Temperature
32? to 86?F (0? to 30?C) for 1.0 PF 32? to 104?F (0? to 40?C) for 0.8 PF
Operating Humidity
30% to 90% Non-Condensing
Operating Altitude
3200 Feet (1000 m)
Listings/Standards
UL 1778; UL 17025, cUL 22.2, No. 107.1; ANSI C62.41 (IEEE 587 Cat B) NFPA 70; OSHA; ISO 9001; IEC298 IP20
Monitoring
Warranty
Three Years Parts and Labor
Dry Contacts Included
Yes for Input and Output Signals
RS232 Port
Included
Intelligent Monitoring (Optional)
SNMP; Modbus RTU; Modbus TCP; BACNET, METASYS
Display
LCD Touch-Panel for Local Monitoring, Operation, and Control
EPO
Emergency Power Off
Included
Configuration
Input Conv.
6-Diode Bridge Rectifier
Battery Cct
IGBT Chopper
Out. Inv.
IGBT Converter with PWM

 

Industries & Applications

  • Hospitals, clinics, and other medical facilities
  • “Lights-out” or “dark factory” manufacturing
  • Large data centers or IT systems
  • Critical network switching & processing equipment
  • Large-scale PLC controls

Request a quote

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

 

Boasting efficiencies that are 10-to20 percent beyond current industry standards, the G9000 Series is excellent for N+1 parallel systems where loads are typically 30-to 40 percent. Designed for either standalone or parallel use, the G9000 Series allows you to configure as many of eight units— without requiring the use of a special switchgear cabinet.

Toshiba proprietary technology and double-conversion topology provide AC/DC/AC efficiencies of up to 97 percent at loads from 50 to 100 percent. In fact, even at 20 percent loading, the efficiency remains greater than 94 percent. Available in capacities of 100, 160, 225, 300, 500, 750, and 1000kVA, the G9000 Series comes with an industry-leading three-year onsite warranty.


Features & Benefits

  • Efficiencies 10-to20 percent beyond current industry standards
  • Excellent for N+1 parallel systems where loads are typically 30-to 40 percent
  • Designed for either standalone or parallel use
  • Configure as many of eight units— without requiring the use of a special switchgear cabinet
  • Double-conversion topology provides AC/DC/AC efficiencies of up to 97 percent at loads from 50 to 100 percent.
  • Efficiency remains greater than 94 percent even at as low as 20-percent loading
  • Available in capacities of 100, 160, 225, 300, 500, 750, and 1000kVA
  • Comes with an industry-leading three-year onsite warranty

Request a quote

 

Technical Specs

G9000 Standard Specifications
MODEL NUMBER
T90S3S10KS6XSN
T90S3S16KS6XSN
T90S3S22KS6XSN
T90S3S30KS6XSN
T90S3S50KS6XSN
T90S3S75KS6XSN
T90S3S01MS6XSN
Capacity (KVA/KW)
100/90
160/144
225/202.5
300/300
500/500
750/750
1000/1000
Topology True On-Line, Double Conversion, Advanced Multi-Level IGBT Technology
INPUT
Voltage 480 V, Three-Phase, Three-Wire + Ground/Bypass Input; 480 V, Three-Phase, Three-Wire + Ground
Voltage Range 480 V, -20% to +15% (384 to 552 V Without Utilizing Battery)
Power Factor Greater than 0.99
Current THD < 3% at 100% Load (No Input Filter Required)
Frequency 60 Hz (±10%)
OUTPUT
Voltage 480 V, Three-Phase, Three-Wire + Ground
Frequency 60 Hz, ±0.01% (In Free-Running Mode)
Voltage Regulation ±1.0% (0.5% Typical)
Power Factor 0.9 Lagging 1.0 (Unity)
Voltage THD < 2% for Linear Load; < 5% for Non-Linear Load
Overload (Inverter) 125% for 2 Minutes; 150% for 60 Seconds 125% for 10 Minutes; 150% for 60 Seconds
Overload (Bypass) 1000% for One Cycle 500% for One Cycle
BATTERY
DC Link 480 VDC Nominal
ENVIRONMENT
Temperature Range 32° to 104°F (0° to 40°C)
Relative Humidity 5% to 95% Non-Condensing
Heat Rejection 13.5 kBTU/Hour 17.8 kBTU/Hour 25.1 kBTU/Hour 31.7 kBTU/Hour 52.8 kBTU/Hour 79.2 kBTU/Hour 112.8 kBTU/Hour
Efficiency (Full Load) 95.80% 96.50% 96.50% 97.00% 97.00% 97.00% 96.80%
Efficiency (20% Load) 92.50% 94.70% 94.90% 94.40% 94.80% 95.50% 95.50%
Altitude 7380 Feet Maximum Without Derating (2250 Meters) 6500 Ft. max
Audible Noise 70 DBA at 1 Meter 73 DBA at 1 Meter
DIMENSIONS
Dimensions (W x D x H) 27.6 x 32.8 x 80.6 in. 35.4 x 32.8 x 80.6 in. 51.2 x 32.7 x 80.7 in 70.9 x 32.7 x 80.7 in. 90.6 x 32.7 x 80.7 in. 118.2 x 35.5 x 80.7 in.
700 x 832 x 2047 mm 900 x 832 x 2047 mm 1300 x 832 x 2050 mm 1800 x 832 x 2050 mm 2300 x 832 x 2050 mm 3003 x 902 x 2050 mm
Weight 855 lbs. 1160 lbs. 1230 lbs. 2260 lbs. 3360 lbs. 4250 lbs. 6613 lbs.
388 kg 526 kg 558 kg 1025 kg 1525 kg 1928 kg 3000 kg
FEATURES
Digital Signal Processor (DSP) Control, Fully Digital IGBT Converter & Inverter, High Efficiency Over Wide Load Range,
Transformer-Less Design, N+1 & N+N (Up to Eight in Parallel) Capability, Dual-Input Feed, Electronic Battery Isolation,
RS232 and Dry Contact Interface, Small Footprint, & Lightweight Design
STANDARDS
UL 1778 and UL-C Listed, ISO9001, ISO14001, ANSI C62.41(IEEE 587), FCC Class A, Article 47, Part 15.B UL 1778 and UL-C Listed, ISO9001, ISO14001, ANSI C62.41(IEEE 587), IEC 62040-2 Cat.3
WARRANTY
Three Years Onsite (Optional Two-Year Extended Warranty); See Toshiba Warranty Policy for Full Details
SERVICE
24-Hour, 365-Day Technical Support 877-226-3311

 

Industries & Applications

  • Police & fire emergency call centers
  • Military applications
  • “Lights-out” or “dark factory” manufacturing
  • Large data centers or IT systems
  • Critical network switching & processing equipment
  • Large-scale PLC controls

Request a quote

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

The 1600 Series is tower-design, double-conversion online industrial UPS system or commercial UPS system that can supply clean, uninterrupted power to mission-critical loads over large input voltage deviations—without resorting to battery backup. Wide input voltage and frequency windows maximize generator compatibility. Input power factor is greater than 95 percent with an output power factor of 85 percent. LCD touch-screen display for easy UPS monitoring and control. Options include network interface card (RemotEye® II) environmental monitoring device. Available in 3.6, 6.0, 8.0, 10.0, 14, 18, and 22 KVA.

Features & Benefits

  • Digital LCD touchscreen display
  • Hot swappable batteries
  • Internal isolation transformer
  • Wide input voltage & frequency windows
  • Input power factor > 95 percent
  • Power factor correction
  • Output power factor 85 percent
  • Optional network interface card for remote monitoring/control
  • Optional external battery cabinets
  • Optional environmental monitoring device

Request a quote

 

Technical Specs

1600XP/XPi Specifications Spreadsheet
Capacity
3.6 KVA
(3.1 KW)
6 KVA
(5.1 KW)
8 KVA
(6.8 KW)
10 KVA
(8.5 KW)
14 KVA
(11.9 KW)
18 KVA
(15.3 KW)
22 KVA
(18.7 KW)
Topology
True On-Line, Double Conversion; IGBT Power Factor Corrected Input; Internal Isolation Transformer
Certifications
UL 1778, CUL, CE, FCC Class A, IEEE 587, ANSI/C62.41, ISO 9001, ISO 14001, NEMA/PE1-1993, RoHs
Input Characteristics
Input Voltage
(Based on Typical 70% Load)
Single-Phase 208/240 VAC (Three-Wire Input/L-L, G); 230 VAC (Three-Wire Input/L, N, G), +10% -30%
Input Frequency
45 to 65 Hz (Auto-Sensing)
Input Power Factor
> 0.95 For All Loads
Input Current THD
< 5% (Even for 100% Non-Linear Loads)
AC Input Breaker Rating
30 A
50 A
60 A
63 A
100 A
100 A
125 A
Battery Characteristics
Battery Type
Valve-Regulated Lead Acid; Flame Retardant (9.0 Amp Hr)
Backup Time (Fully Charged)
7 Minutes
7 Minutes
7 Minutes
5 Minutes
7 Minutes
5 Minutes
3 Minutes
0.85 Power Factor; 77° F; Approximately 30% More Runtime for Output Power Factor of 0.7 (Triple Backup Time at ½ Load)
Recharge Time
24 Hours (Full), 12 Hours (90%)
DC Link
144 VDC
216 VDC
288 VDC
Output Characteristics
Output Voltage
Single-Phase 240/208/120 VAC (Four-Wire Output/L-L, N, G) 230 VAC (Three-Wire Output L, N, G)
Output Voltage Regulation
3%; ±1% Typical
Output Frequency
50/60 Hz; ±0.5 Hz/1.0 Hz/1.5 Hz (Factory or Authorized Service Center Selectable)
Output Voltage THD
< 3% for Linear Load; 1% Typical
Common Mode Noise
< 0.5 V RMS
Rated-Load Power Factor
0.85 (0.6 to 1.0) Lag
Rated Output Current @ 240 V
15 A
25 A
33.3 A
41.6 A
58 A
75A
91.6 A
Maximum Peak Output Current
45 A
75 A
100 A
125 A
174 A
225 A
275 A
Overload Capacity
Inverter Mode: 150% for 10 Seconds, 125% for 30 seconds; Bypass Mode: 125% for 10 Minutes, 1000% for One Cycle
Environmental Characteristics
Efficiency (AC-DC-AC)
> 85%
Temperature Range
0 to 40°C (Operating); -20° to +40°C (Storage)
Heat Generation (BTU/Hr)
1843
3071
4095
5118
7168
9213
11,260
Altitude
6600 Feet (2000 Meters) Maximum Without Derating
Audible Noise
< 60 DBA @ 1 Meter
Mechanical Design
Enclosure
Steel Enclosure; Complies with NEMA 1 and UL Type-1 Standard
Enclosure Dimensions (HxWxD)
22.1″ x 10″ x 33″
27.5″ x 10″ x 33″
28.4″ x 13″ x 34.9″
39.1″ x 17.5″ x 36.1″
Shipping Weight
280 lb/127 kg
346 lb/157 kg
476 lb/214 kg
784 lb/355 kg
784 lb/355 kg
835 lbs/379 kg
Battery Pack Size (HxWxD)
5″ x 7.3″ x 19″ (Battery Pack Part # 51896-FS)
Battery Pack Quantity
Two
Three
Four
Eight
Additional Key Features
Output Isolation Transformer, RS232 & Dry Contact Interface, Crest Factor of 3, Angled Terminal Blocks for Easy Installation, Casters for Mobility
Options
SNMP & WEB-Based Monitoring
RemotEye® III, RemotEye® 4, RemotRadar™, & Environmental Monitoring Device
Matching Battery Cabinet
Consult Factory
Internal/External Maintenance Bypass
Consult Factory
Receptacle Panel & Line Cord
Consult Factory
Warranty
Three Years on Electronics (UPS); Two Years on Battery (See Toshiba Warranty Policy for Full Details)

 

Industries & Applications

  • Industrial Systems
  • Health Care
  • Laboratories
  • Small Business Offices
  • Point-of Sale Equipment
  • Internet Service Provider
  • Server Consolidation
  • Datacenters
  • Storage
  • Wiring Closets

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

The 1000 Series is a single-phase double-conversion, true online uninterruptible power system that’s available in both tower and rackmount designs. Features include auto-restart and cold start, programmable load-shed receptacle,
intelligent charger with rapid charge in only 4.0 hours to 90 percent. Wide input voltage and frequency windows maximize generator compatibility. Input power factor is greater than 97 percent with an output power factor of 70 percent (0.8 PF for 2.4 KVA). LCD displays in multiple languages. Options include network interface card (RemotEye® II) environmental monitoring device. Available in 1.0, 1.5, 2.0, 2.4, 3.0, and 6.0 KVA.

Features & Benefits

  • Auto-restart and cold start
  • Programmable load-shed receptacle
  • Intelligent charger with rapid charge in only 4.0 hours to 90 percent
  • Wide input voltage window
  • Wide input frequency window for comp generator compatibility
  • Input power factor > 97 percent
  • Output power factor 0.70 (0.8 PF for 2.4KVA)
  • LCD display in multiple languages
  • Optional network interface card – RemotEye® II
  • Optional environmental monitoring device

Request a quote

Technical Specs

1000 Series Specifications
Category
1000 Series
1000+ Series
Size
1000 VA
1500 VA
2000 VA
3000 VA
6000 VA
1000 VA
2400 VA
Tower US 120V Model
UT1A1A010C6
UT1A1A015C6
UT1A1A020C6
UT1A1A030C6
UT1A1A010C6T
UT1G2L024C6T
International 230V Model
UT1E1E010C6
UT1E1E015C6
UT1E1E020C6
UT1E1E030C6
Rackmount (2U) US 120V Model
UT1A1A010C6RKB2
UT1A1A015C6RKB2
UT1A1A020C6RKB2
UT1A1A030C6RKB2
International 230V Model
UT1E1E010C6RKB2
UT1E1E015C6RKB2
UT1E1E020C6RKB2
UT1E1E030C6RKB2
UT1G1G060C6RKB3 + UT1-BR-0607
Input Voltage
120 VAC (80 – 144 V, +20% to -33%)
120 VAC
Single-Phase 208/240 VAC (Three-Wire Input/L-L, G) (160 – 276 V, +15% to -34%)
Voltage (International)
230 VAC (161 – 276 V, +20% to -30%)
Capacity (VA)
1000 VA
1500 VA
2000 VA
3000 VA
6000 VA
1000 VA
2400 VA
Capacity (W)
700 W
1050 W
1400 W
2100 W
4200 W
700 W
1920 W
Frequency
50 / 60 Hz auto sensing
Power Factor
Greater than 0.97
Topology
True on-line, Double conversion, Input PF correction
True on-line, Double conversion, Input PF correction Isolation Transformer
Output Voltage
100/110/115/120/127 VAC
100/110/115/120/127 VAC
120/200/208/220/230/240 VAC
Voltage (International)
208/220/230/240 VAC
Frequency
50 / 60 Hz auto sensing
Wave Form
Sine wave, zero transfer time
Load Power Factor
0.7
0.8
Efficiency AC/DC/AC
Greater than 86%
> 89 %
> 86%
> 87%
Rated Current
8.3 A
12.5 A
16.6 A
25 A
8.3 A
10A (240V)
Rated Current (International)
4.3 A
6.5 A
8.7 A
13 A
25 A (240V)
Overload Capacity
125% for 1 min, 130% for 10 sec
Crest Factor
3.0 at full load
Battery DC Voltage (Tower & 2U)
36 V / 12 V 9 AH x 3
72V / 12 V 9AH x 6
240V 12V x 20
36 V / 12 V 9 AH x 3
72V / 12 V 9AH x 12 (2 strings)
Backup Time (Tower & 2U)
7 min (full load)
6 min (full load)
6 min (full load)
5 min (full load)
7 min (full load)
11 minutes
Type
Valve-Regulated Lead Acid; Flame Retardant (9.0 Amp Hr)
Physical Interface
RS-232 and USB standard, Remote Contact, RemotEye II© and EMD option
Dimensions Tower (L X W X H)
16.5″ x 6.0″ x 9.4″
16.7″ x 8.9″ x 14.2″
23.3″ x 6.0″ x 9.4″
23.2″ x 10.1″ x 27.6″
Dimensions 2U (L X W X H)
16.7″ x 16.9″ x 3.5″
25.0″ x 16.9″ x 3.5″
16.8Lx23.5Wx10.5H (6U)
Weight (Tower/2U)
35.6 lbs / 37.6 lbs
37.4 lbs / 37.6 lbs
68.4 lbs /69.5 lbs
72.6 lbs / 71.5 lbs
148 lbs
51 lbs
154.3 lbs
Line Cord
5-15P
5-20P
L5-30P
5-15P
Hardwire or Optional L6-20P
Line Cord (International)
IEC 320
Hardwire & L6-30P
Receptacles (Tower/2U)
NEMA 5-15R (6/6)
NEMA 5-20R (12/4)
L6-30R (2)
NEMA 5-15 (6)
Hardwire/Optional (3) 5-20R or (2) L6-20R & (1) 5-20R Duplex
Receptacles (Tower/2U) International
IEC 320 C13 (4/4)
IEC 320 C13 (4/4)
IEC 320 C13 (8/4)
IEC 320 C13 (8/4)
Environment Operating Temperature
0 – 40oC (32 – 104oF)
Altitude
11500 ft (3500 m) above sea level
Warranty
Three years on electronics
Two years full replacement on battery (See Toshiba warranty policy for full details.)

 

Industries & Applications

  • Industrial Systems
  • Health Care
  • Laboratories
  • Small Business Offices
  • Point-of Sale Equipment
  • Internet Service Provider
  • Server Consolidation
  • Datacenters
  • Storage
  • Wiring Closets

Request a quote

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

 

Easy to install and maintain, and versatile enough to accommodate office environments as well as more-demanding commercial and industrial ones, the LP 11 Series by GE is a true-voltage, frequency-independent, double conversion, online UPS system designed to provide the highest level of protection for all critical loads against all utility variances and failure.

Highly scalable, the GE proprietary redundant parallel architecture allows you to parallel up to four units as increasing business growth might require, as well as simultaneously enhancing total system reliability, and eliminating the possibility of single points of failure.

Ergonomically designed LCD interface provides clear status data, functions as a service screen to adjust UPS parameters, and includes a comprehensive event log. Integrated transformer ensures galvanic isolation on the output for ultimate safe installation. Available with optional matching battery cabinets to extend runtime, the LP 11 Series comes with a comprehensive warranty.


 

Features & Benefits

  • High efficiency at all loads
  • Can operate between 0°C to 40°C
  • Advanced battery protection
  • Hot-swappable batteries
  • Regular automatic battery test
  • Short circuit and overload protection
  • Cold start
  • 50/60 auto-sensing—can be used as a frequency converter
  • Energy-saving eco-friendly 95 percent efficiency
  • At-a-glance LED display of system status

Request a quote

 

Product Scope

Single Phase Output Voltages 120/208/230/240V
Wide input voltage window Minimizes battery use, prolongs battery life
RPA functionality for paralleling and redundancy UPS capacity can be increased as site requirements require at no extra cost
Internal automatic bypass switch Continuous power supply to the load even if the UPS is overloaded
0.8 output power factor Prevents the need to oversize the UPS
0.99 input power factor
Manual automatic bypass switch Integrated as standard to the rear of the UPS
GE’s unique Superior Battery Management Ultimate protection for the UPS core component
High efficiency 91% – 94% (model dependent) Using ECO mode, high efficiency and low losses
No load shutdown Prevents deep battery discharge al low loads
Frequency conversion 50/60Hz Operates as a frequency converter also operating in a parallel system

 

Technical Specs

GE LP-11U Series UPS (5kVA-10kVA) Technical Specifications
MODEL NUMBER LP11U-5 LP11U-5 (120) LP11U-6 LP11U-6 (120V) LP11U-8 LP11U-10
Rating (VA/W) 5000 / 4000 5000 / 4000 6000 / 4800 6000 / 4800 8000 / 6400 10,000 / 8000
Backup Time @ 50% / 100% loads 25 / 10 min. 25 / 10 min. 20 / 8 min. 20 / 8 min. 29 / 11 min. 22 / 8 min.
Enclosure (Table 1) A B A B A A
Net Wgt Incl. Batteries (kg/lbs) 134/295 175/386 134/295 175/386 175/386 186/410
Input Voltage (VAC)
Nominal 208 120 208 120 208 208
Range @ 100% Load (V) 162-285 81-141 162-285 81-141 162-285 162-285
Range @ 50% Load (V) 146-285 72-141 146-285 72-141 146-285 146-285
Input Power Factor .99
Input Frequency (Hz) 40-70
Output Power Factor .8
Output Voltage (VAC) (sinusoidal) 120+208+220/230/240 User Selectable
Output Frequency (Hz) 50/60
Output Voltage Regulation +/- 1%
Output THD at Linear Load <1%
Output THD at Non-linear Load <2%
Crest Factor Handling Capacity of a Non-linear Load 5:1
Overload Capability on Inverter 110% 20 min., 130% 3.5 min., 150% 2 min.
Color Front bezel: Aluminum Grey (RAL9006); Cabinet: Pure White (RAL9010)
Environment IP20 (IEC 60529)
Operating Temperature / Humidity 32° F – 104° F (0° C – 40° C) / 95% Non-condensing
Audible Noise 40-50 dBA – 3.3 feet (1 meter)
Safety Classifications & Listings UL, cUL 1778; CE: EN50091-1-1; EN 60950; IEC 950
EMI FCC Part 15 Class A / EN50091-2
Surge Protection IEC 1000-4-5 (6kV 1.2/50 μsec – 3kA 8/20 μsec) IEEE 587 B, EN 50091-2
Connectivity RS-232; programmable alarm contacts (optional); SNMP (optional)
Warranty 24 Months

1. Due to continuous product improvements, program specifications are subject to change without notice.

 

Industries & Applications

  • Hospitals, clinics, medical centers
  • Government & business offices
  • Police & fire emergency call centers
  • Military applications
  • “Lights-out” or “dark factory” manufacturing
  • Large data centers or IT systems
  • Critical network switching & processing equipment
  • Large-scale PLC controls

Request a quote

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

Ideal for servers supporting varying load levels, the IT Series by GE is a robust commercial UPS system or industrial UPS system for providing cost-effective protection against power outages, voltage fluctuations, and transient surges for sensitive equipment. Line-interactive with automatic voltage regulation (AVR) to ensure sine wave purity, it’s available in both tower and 19-inch rack formats. Standard features include hot-swappable batteries, RS232 and USB communication ports, and a RJ11 port for telephone/modem protection. Product warranty is a full two years.

Features & Benefits

  • High efficiency at all loads
  • Can operate between 0°C to 40°C
  • Advanced battery protection
  • Hot-swappable batteries
  • Regular automatic battery test
  • Short circuit and overload protection
  • Cold start
  • 50/60 auto-sensing—can be used as a frequency converter
  • Energy-saving eco-friendly 95 percent efficiency
  • At-a-glance LED display of system status

Request a quote

Product Specifications

Single Phase Output Voltages 125V
50/60 auto-sensing Can be used as a frequency converter
95% efficiency Low losses and greater energy savings
Intelligent LED display Quick visual of UPS, load and battery status
Wide operating temperature UPS can operate between 0°C to 40°C

 

Technical Specs

GE IT Series UPS Technical Specifications
MODEL NUMBER UPS0600ITSIT , UPS1000ITSIT , UPS1500ITSIT , UPS2000ITSIT
POWER RATING OUTPUT CAPACITY 600VA / 360W , 1000VA / 600W , 1500VA / 900W , 2000VA / 1200W
POWER FACTOR OUTPUT POWER FACTOR 0.6 pf
INPUT VOLTAGE
FREQUENCY
INPUT POWER CONNECTION
120V +/- 10% at line input, single phase
50 or 60 Hz +/- 5Hz auto-sensing
Detachable 5-15P , Detachable 5-15P , Hardwired 5-15P , Hardwired 5-20P
OUTPUT VOLTAGE (on battery)
VOLTAGE (on mains)
VOLTAGE THD
FREQUENCY (on battery)
VOLTAGE REGULATION (AVR)OUTPUT RECEPTACLES – POWER DISTRIBUTION
Pure sine wave at +/- 5% of nominal, -10% of nominal after low battery warning
120V, -12%/+10%
< 5% @ 100% resistive load with 80% battery capacity
50 or 60 Hz +/- 5% auto-sensing
AVR automatically increases (boost) output voltage 17% above input voltage if -9% to -25% of nominal.
AVR decreases (buck) output voltage 14% below input voltage if +9% to +25% of nominal.(4) 5-15R , (4) 5-15R , (6) 5-15R , (6) 5-15R
PROTECTION & FILTERING SPIKE PROTECTION
EMI/RF FILTER
OVERLOAD PROTECTION
TRANSFER TIME
SHORT CIRCUIT
780 Joules/6500A
10dB @ 0.15MHz, 50 dB @ 30 MHz
UPS automatic shutdown if overload exceeds 110% of nominal @ 20 seconds and 125% @ 5 seconds
4/6 milliseconds (typical), including detection time
Active protection with automatic shutdown
BATTERY SYSTEM TYPE
BATTERY
TYPICAL RECHARGE TIME
PROTECTION
BATTERY QUANTITY
Hot swappable, sealed Valve Regulated Lead Acid (VRLA)
12V / 9.0 AH
4 hours (to 90% of full capacity)
Automatic self-test and discharge protection, Replace battery indicator
2 pcs , 2 pcs , 3 pcs , 4 pcs
NET WEIGHT(lbs)
DIMENSIONS WxDxH(inches)
30.4 lbs , 33.0 lbs , 55.0 lbs , 66.0 lbs
5.5″ x 17.2″ x 8.3″ , 5.5″ x 17.2″ x 8.3″ , 6.7″ x 17.7″ x 8.9″ , 6.7″ x 17.7″ x 8.9″
COMMUNICATIONS RS-232
USB
SNMP
OPERATING SYSTEM
Standard (Detect battery low, schedule UPS on/off, AC Input/Output power status display)
Standard
Optional
Windows NT, Windows 2000/ME, Windows XP, Linux
ENVIRONMENT AMBIENT OPERATION
AUDIBLE NOISE @ 1 METER
STORAGE CONDITION
3,500 meters max. elevation, 0-95% RH non-condensing, 0-40°C
< 40 dBA , < 45 dBA
15,000 meters max. elevation, 0-95% RH non-condensing, 0-40°C
CERTIFICATIONS UL, cUL, FCC Class A

1. Due to continuous product improvements, program specifications are subject to change without notice.

 

Industries & Applications

The IT Series by GE is an ideal battery backup power supply for one- or two-rack users in clinics & hospitals, financial institutions, businesses, and other sites in need of a commercial UPS system that offers superior online power quality and scalable battery runtimes in applications including but not limited to:

  • Smaller data centers, IT systems, or telecom closets
  • Network switching & processing equipment
  • PLC controls
  • High-quality power backup system for AS-400 systems

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

Easy to install and maintain, the LP-33U Series is a true voltage & frequency independent, online, double-conversion UPS designed to provide robust power protection for a wide range applications. Transformerless design is compact, quiet, and easily transportable, making it an ideal commercial UPS system for offices or industrial UPS system for manufacturing environments. Both its power and redundancy are expandable by adding units (N2) to create a parallel system. Available in tower or rack configurations. Proprietary RPA™ technology precisely synchronizes the outputs and automatically shares the load supported by each UPS. Standard features include standard remote monitoring, simplifying operation from remote or unmanned sites, as well as an RS-232 port and contact interface. Options include a Web-enabled SNMP card.

Features & Benefits

  • High input power factor (>.98)
  • Low THD (<.08) eliminates need for costly filters or oversized feeders by preventing disturbances to other electrical equipment
  • Transformerless design is compact, quiet, and easily transportable
  • Ideal commercial UPS system for offices or industrial UPS system for manufacturing environments.
  • Proprietary RPA™ Configuration and ECO-mode provides energy savings and is eco-friendly
  • Superior Battery Management (SBM) enhances battery lifetime
  • Integrated internal manual maintenance bypass
  • Optional external battery cabinets available for extended runtime requirements

Request a quote

 

Product Snapshot

  • 3-phase in/out, 10-100 kVA (parallel up to 4 units using RPA)
  • 54-66Hz input frequency
  • 208 volts
  • UL 1778 listed
  • True Online Double Conversion topology
  • ECO mode operating efficiency up to 98%
  • IEC 62040-2 listed
  • 0.8 – 0.9 PF
  • FCC class A

 

Technical Specs

GE LP-33U Series UPS Technical Specifications (10kVA-100kVA)
MODEL NUMBER LP-33U-10 LP-33U-20 LP-33U-30 LP-33U-40 LP-33U-50 LP-33U-60 LP-33U-80 LP-33U-100
POWER RATING
Output Capacity 10kVA/8kW 20kVA/16kW 30kVA/24kW 40kVA/32kW 50kVA/45kW 60kVA/54kW 80kVA/72kW 100kVA/90kW
POWER FACTOR
Output Power Factor 0.8 0.9
PHYSICAL
Weight w/o Batteries (lbs) 397 430 772 816 1,015 1,323
Dimensions (WxDxH)(inches)(UPS only) 22.7″ x 30.7″ x 51.6″ 23.6″ x 29.6″ x 71.7 “ 28.4″ x 28.5″ x 71.7″ 39.4″ x 35.4″ x 75.0″
INPUT
Input Voltage 3 x 208V + N
Voltage Range -25% / +20% -20% / +15% -15% / +10%
Frequency 60 Hz +/- 10%
Input THD <8% <10%
Input Power Factor >0.98 lagging
OUTPUT
Output Voltage 120Y / 208 V
Frequency 50/60 Hz (+/- 1%)
Crest Factor >3:1
Voltage Regulation
Static +/- 1%
– 100% Step Load +/- 1% +/- 2%
Voltage Distortion
– 100% Linear Load < 2% THD < 1.5% THD < 2% THD
– 100% Non-Linear Load < 3% THD (EN 50091)
Overload Capability
– Inverter 125% for 10 minutes; 150% for 1 minute
– Bypass 200% for 2 minutes; 2000% for ½ cycle
BATTERY
Battery Type Valve Regulated Lead Acid (VRLA)
Float Voltage 328 VDC @ 20° C
Min Discharge Voltage 236 VDC (programmable)
GENERAL
Audible Noise db(A) 50 55 61 62 65 65 68
Operating Temperature – UPS 32° to 104° F (0° – 40° C)
Operating Temperature – Battery 68° to 77° F (20° – 25° C) recommended
Humidity 0-95%; non-condensing
Safety Classifications & Listings UL/cUL : UL 1778 / IEC62040 / ISO 9001
EMI Classification FCC Part 15, Class A, IEC 62040-2 Class A
Surge Protection IEEE 587-B / ANSI C62.41-B / IEC 1000-4
Communication / Connectivity RS-232; programmable alarm contacts; open collector outputs; SNMP (optional)
Color White (RAL 9003)
Warranty Twelve (12) months after commissioning or eighteen (18) months after shipment, whichever occurs first *

1. Due to continuous product improvements, program specifications are subject to change without notice.

 

Industries & Applications

The LP-33U Series is purpose-engineered for demanding applications require extraordinary levels of reliability such as 911 centers, global military installations, marine vessels, and other mission-critical applications that demand an industrial UPS system that is also a high quality power backup system for sensitive equipment. Applications include but are not limited to:

  • Police & fire emergency call centers
  • Military applications
  • “Lights-out” or “dark factory” manufacturing
  • Large data centers or IT systems
  • Critical network switching & processing equipment
  • Large-scale PLC controls

Request a quote

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.