The 1600 Series is tower-design, double-conversion online industrial UPS system or commercial UPS system that can supply clean, uninterrupted power to mission-critical loads over large input voltage deviations—without resorting to battery backup. Wide input voltage and frequency windows maximize generator compatibility. Input power factor is greater than 95 percent with an output power factor of 85 percent. LCD touch-screen display for easy UPS monitoring and control. Options include network interface card (RemotEye® II) environmental monitoring device. Available in 3.6, 6.0, 8.0, 10.0, 14, 18, and 22 KVA.

Features & Benefits

  • Digital LCD touchscreen display
  • Hot swappable batteries
  • Internal isolation transformer
  • Wide input voltage & frequency windows
  • Input power factor > 95 percent
  • Power factor correction
  • Output power factor 85 percent
  • Optional network interface card for remote monitoring/control
  • Optional external battery cabinets
  • Optional environmental monitoring device

Request a quote

 

Technical Specs

1600XP/XPi Specifications Spreadsheet
Capacity
3.6 KVA
(3.1 KW)
6 KVA
(5.1 KW)
8 KVA
(6.8 KW)
10 KVA
(8.5 KW)
14 KVA
(11.9 KW)
18 KVA
(15.3 KW)
22 KVA
(18.7 KW)
Topology
True On-Line, Double Conversion; IGBT Power Factor Corrected Input; Internal Isolation Transformer
Certifications
UL 1778, CUL, CE, FCC Class A, IEEE 587, ANSI/C62.41, ISO 9001, ISO 14001, NEMA/PE1-1993, RoHs
Input Characteristics
Input Voltage
(Based on Typical 70% Load)
Single-Phase 208/240 VAC (Three-Wire Input/L-L, G); 230 VAC (Three-Wire Input/L, N, G), +10% -30%
Input Frequency
45 to 65 Hz (Auto-Sensing)
Input Power Factor
> 0.95 For All Loads
Input Current THD
< 5% (Even for 100% Non-Linear Loads)
AC Input Breaker Rating
30 A
50 A
60 A
63 A
100 A
100 A
125 A
Battery Characteristics
Battery Type
Valve-Regulated Lead Acid; Flame Retardant (9.0 Amp Hr)
Backup Time (Fully Charged)
7 Minutes
7 Minutes
7 Minutes
5 Minutes
7 Minutes
5 Minutes
3 Minutes
0.85 Power Factor; 77° F; Approximately 30% More Runtime for Output Power Factor of 0.7 (Triple Backup Time at ½ Load)
Recharge Time
24 Hours (Full), 12 Hours (90%)
DC Link
144 VDC
216 VDC
288 VDC
Output Characteristics
Output Voltage
Single-Phase 240/208/120 VAC (Four-Wire Output/L-L, N, G) 230 VAC (Three-Wire Output L, N, G)
Output Voltage Regulation
3%; ±1% Typical
Output Frequency
50/60 Hz; ±0.5 Hz/1.0 Hz/1.5 Hz (Factory or Authorized Service Center Selectable)
Output Voltage THD
< 3% for Linear Load; 1% Typical
Common Mode Noise
< 0.5 V RMS
Rated-Load Power Factor
0.85 (0.6 to 1.0) Lag
Rated Output Current @ 240 V
15 A
25 A
33.3 A
41.6 A
58 A
75A
91.6 A
Maximum Peak Output Current
45 A
75 A
100 A
125 A
174 A
225 A
275 A
Overload Capacity
Inverter Mode: 150% for 10 Seconds, 125% for 30 seconds; Bypass Mode: 125% for 10 Minutes, 1000% for One Cycle
Environmental Characteristics
Efficiency (AC-DC-AC)
> 85%
Temperature Range
0 to 40°C (Operating); -20° to +40°C (Storage)
Heat Generation (BTU/Hr)
1843
3071
4095
5118
7168
9213
11,260
Altitude
6600 Feet (2000 Meters) Maximum Without Derating
Audible Noise
< 60 DBA @ 1 Meter
Mechanical Design
Enclosure
Steel Enclosure; Complies with NEMA 1 and UL Type-1 Standard
Enclosure Dimensions (HxWxD)
22.1″ x 10″ x 33″
27.5″ x 10″ x 33″
28.4″ x 13″ x 34.9″
39.1″ x 17.5″ x 36.1″
Shipping Weight
280 lb/127 kg
346 lb/157 kg
476 lb/214 kg
784 lb/355 kg
784 lb/355 kg
835 lbs/379 kg
Battery Pack Size (HxWxD)
5″ x 7.3″ x 19″ (Battery Pack Part # 51896-FS)
Battery Pack Quantity
Two
Three
Four
Eight
Additional Key Features
Output Isolation Transformer, RS232 & Dry Contact Interface, Crest Factor of 3, Angled Terminal Blocks for Easy Installation, Casters for Mobility
Options
SNMP & WEB-Based Monitoring
RemotEye® III, RemotEye® 4, RemotRadar™, & Environmental Monitoring Device
Matching Battery Cabinet
Consult Factory
Internal/External Maintenance Bypass
Consult Factory
Receptacle Panel & Line Cord
Consult Factory
Warranty
Three Years on Electronics (UPS); Two Years on Battery (See Toshiba Warranty Policy for Full Details)

 

Industries & Applications

  • Industrial Systems
  • Health Care
  • Laboratories
  • Small Business Offices
  • Point-of Sale Equipment
  • Internet Service Provider
  • Server Consolidation
  • Datacenters
  • Storage
  • Wiring Closets

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

The 1000 Series is a single-phase double-conversion, true online uninterruptible power system that’s available in both tower and rackmount designs. Features include auto-restart and cold start, programmable load-shed receptacle,
intelligent charger with rapid charge in only 4.0 hours to 90 percent. Wide input voltage and frequency windows maximize generator compatibility. Input power factor is greater than 97 percent with an output power factor of 70 percent (0.8 PF for 2.4 KVA). LCD displays in multiple languages. Options include network interface card (RemotEye® II) environmental monitoring device. Available in 1.0, 1.5, 2.0, 2.4, 3.0, and 6.0 KVA.

Features & Benefits

  • Auto-restart and cold start
  • Programmable load-shed receptacle
  • Intelligent charger with rapid charge in only 4.0 hours to 90 percent
  • Wide input voltage window
  • Wide input frequency window for comp generator compatibility
  • Input power factor > 97 percent
  • Output power factor 0.70 (0.8 PF for 2.4KVA)
  • LCD display in multiple languages
  • Optional network interface card – RemotEye® II
  • Optional environmental monitoring device

Request a quote

Technical Specs

1000 Series Specifications
Category
1000 Series
1000+ Series
Size
1000 VA
1500 VA
2000 VA
3000 VA
6000 VA
1000 VA
2400 VA
Tower US 120V Model
UT1A1A010C6
UT1A1A015C6
UT1A1A020C6
UT1A1A030C6
UT1A1A010C6T
UT1G2L024C6T
International 230V Model
UT1E1E010C6
UT1E1E015C6
UT1E1E020C6
UT1E1E030C6
Rackmount (2U) US 120V Model
UT1A1A010C6RKB2
UT1A1A015C6RKB2
UT1A1A020C6RKB2
UT1A1A030C6RKB2
International 230V Model
UT1E1E010C6RKB2
UT1E1E015C6RKB2
UT1E1E020C6RKB2
UT1E1E030C6RKB2
UT1G1G060C6RKB3 + UT1-BR-0607
Input Voltage
120 VAC (80 – 144 V, +20% to -33%)
120 VAC
Single-Phase 208/240 VAC (Three-Wire Input/L-L, G) (160 – 276 V, +15% to -34%)
Voltage (International)
230 VAC (161 – 276 V, +20% to -30%)
Capacity (VA)
1000 VA
1500 VA
2000 VA
3000 VA
6000 VA
1000 VA
2400 VA
Capacity (W)
700 W
1050 W
1400 W
2100 W
4200 W
700 W
1920 W
Frequency
50 / 60 Hz auto sensing
Power Factor
Greater than 0.97
Topology
True on-line, Double conversion, Input PF correction
True on-line, Double conversion, Input PF correction Isolation Transformer
Output Voltage
100/110/115/120/127 VAC
100/110/115/120/127 VAC
120/200/208/220/230/240 VAC
Voltage (International)
208/220/230/240 VAC
Frequency
50 / 60 Hz auto sensing
Wave Form
Sine wave, zero transfer time
Load Power Factor
0.7
0.8
Efficiency AC/DC/AC
Greater than 86%
> 89 %
> 86%
> 87%
Rated Current
8.3 A
12.5 A
16.6 A
25 A
8.3 A
10A (240V)
Rated Current (International)
4.3 A
6.5 A
8.7 A
13 A
25 A (240V)
Overload Capacity
125% for 1 min, 130% for 10 sec
Crest Factor
3.0 at full load
Battery DC Voltage (Tower & 2U)
36 V / 12 V 9 AH x 3
72V / 12 V 9AH x 6
240V 12V x 20
36 V / 12 V 9 AH x 3
72V / 12 V 9AH x 12 (2 strings)
Backup Time (Tower & 2U)
7 min (full load)
6 min (full load)
6 min (full load)
5 min (full load)
7 min (full load)
11 minutes
Type
Valve-Regulated Lead Acid; Flame Retardant (9.0 Amp Hr)
Physical Interface
RS-232 and USB standard, Remote Contact, RemotEye II© and EMD option
Dimensions Tower (L X W X H)
16.5″ x 6.0″ x 9.4″
16.7″ x 8.9″ x 14.2″
23.3″ x 6.0″ x 9.4″
23.2″ x 10.1″ x 27.6″
Dimensions 2U (L X W X H)
16.7″ x 16.9″ x 3.5″
25.0″ x 16.9″ x 3.5″
16.8Lx23.5Wx10.5H (6U)
Weight (Tower/2U)
35.6 lbs / 37.6 lbs
37.4 lbs / 37.6 lbs
68.4 lbs /69.5 lbs
72.6 lbs / 71.5 lbs
148 lbs
51 lbs
154.3 lbs
Line Cord
5-15P
5-20P
L5-30P
5-15P
Hardwire or Optional L6-20P
Line Cord (International)
IEC 320
Hardwire & L6-30P
Receptacles (Tower/2U)
NEMA 5-15R (6/6)
NEMA 5-20R (12/4)
L6-30R (2)
NEMA 5-15 (6)
Hardwire/Optional (3) 5-20R or (2) L6-20R & (1) 5-20R Duplex
Receptacles (Tower/2U) International
IEC 320 C13 (4/4)
IEC 320 C13 (4/4)
IEC 320 C13 (8/4)
IEC 320 C13 (8/4)
Environment Operating Temperature
0 – 40oC (32 – 104oF)
Altitude
11500 ft (3500 m) above sea level
Warranty
Three years on electronics
Two years full replacement on battery (See Toshiba warranty policy for full details.)

 

Industries & Applications

  • Industrial Systems
  • Health Care
  • Laboratories
  • Small Business Offices
  • Point-of Sale Equipment
  • Internet Service Provider
  • Server Consolidation
  • Datacenters
  • Storage
  • Wiring Closets

Request a quote

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

 

Easy to install and maintain, and versatile enough to accommodate office environments as well as more-demanding commercial and industrial ones, the LP 11 Series by GE is a true-voltage, frequency-independent, double conversion, online UPS system designed to provide the highest level of protection for all critical loads against all utility variances and failure.

Highly scalable, the GE proprietary redundant parallel architecture allows you to parallel up to four units as increasing business growth might require, as well as simultaneously enhancing total system reliability, and eliminating the possibility of single points of failure.

Ergonomically designed LCD interface provides clear status data, functions as a service screen to adjust UPS parameters, and includes a comprehensive event log. Integrated transformer ensures galvanic isolation on the output for ultimate safe installation. Available with optional matching battery cabinets to extend runtime, the LP 11 Series comes with a comprehensive warranty.


 

Features & Benefits

  • High efficiency at all loads
  • Can operate between 0°C to 40°C
  • Advanced battery protection
  • Hot-swappable batteries
  • Regular automatic battery test
  • Short circuit and overload protection
  • Cold start
  • 50/60 auto-sensing—can be used as a frequency converter
  • Energy-saving eco-friendly 95 percent efficiency
  • At-a-glance LED display of system status

Request a quote

 

Product Scope

Single Phase Output Voltages 120/208/230/240V
Wide input voltage window Minimizes battery use, prolongs battery life
RPA functionality for paralleling and redundancy UPS capacity can be increased as site requirements require at no extra cost
Internal automatic bypass switch Continuous power supply to the load even if the UPS is overloaded
0.8 output power factor Prevents the need to oversize the UPS
0.99 input power factor
Manual automatic bypass switch Integrated as standard to the rear of the UPS
GE’s unique Superior Battery Management Ultimate protection for the UPS core component
High efficiency 91% – 94% (model dependent) Using ECO mode, high efficiency and low losses
No load shutdown Prevents deep battery discharge al low loads
Frequency conversion 50/60Hz Operates as a frequency converter also operating in a parallel system

 

Technical Specs

GE LP-11U Series UPS (5kVA-10kVA) Technical Specifications
MODEL NUMBER LP11U-5 LP11U-5 (120) LP11U-6 LP11U-6 (120V) LP11U-8 LP11U-10
Rating (VA/W) 5000 / 4000 5000 / 4000 6000 / 4800 6000 / 4800 8000 / 6400 10,000 / 8000
Backup Time @ 50% / 100% loads 25 / 10 min. 25 / 10 min. 20 / 8 min. 20 / 8 min. 29 / 11 min. 22 / 8 min.
Enclosure (Table 1) A B A B A A
Net Wgt Incl. Batteries (kg/lbs) 134/295 175/386 134/295 175/386 175/386 186/410
Input Voltage (VAC)
Nominal 208 120 208 120 208 208
Range @ 100% Load (V) 162-285 81-141 162-285 81-141 162-285 162-285
Range @ 50% Load (V) 146-285 72-141 146-285 72-141 146-285 146-285
Input Power Factor .99
Input Frequency (Hz) 40-70
Output Power Factor .8
Output Voltage (VAC) (sinusoidal) 120+208+220/230/240 User Selectable
Output Frequency (Hz) 50/60
Output Voltage Regulation +/- 1%
Output THD at Linear Load <1%
Output THD at Non-linear Load <2%
Crest Factor Handling Capacity of a Non-linear Load 5:1
Overload Capability on Inverter 110% 20 min., 130% 3.5 min., 150% 2 min.
Color Front bezel: Aluminum Grey (RAL9006); Cabinet: Pure White (RAL9010)
Environment IP20 (IEC 60529)
Operating Temperature / Humidity 32° F – 104° F (0° C – 40° C) / 95% Non-condensing
Audible Noise 40-50 dBA – 3.3 feet (1 meter)
Safety Classifications & Listings UL, cUL 1778; CE: EN50091-1-1; EN 60950; IEC 950
EMI FCC Part 15 Class A / EN50091-2
Surge Protection IEC 1000-4-5 (6kV 1.2/50 μsec – 3kA 8/20 μsec) IEEE 587 B, EN 50091-2
Connectivity RS-232; programmable alarm contacts (optional); SNMP (optional)
Warranty 24 Months

1. Due to continuous product improvements, program specifications are subject to change without notice.

 

Industries & Applications

  • Hospitals, clinics, medical centers
  • Government & business offices
  • Police & fire emergency call centers
  • Military applications
  • “Lights-out” or “dark factory” manufacturing
  • Large data centers or IT systems
  • Critical network switching & processing equipment
  • Large-scale PLC controls

Request a quote

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

Easy to install and maintain, the transformerless GT Series is a true voltage & frequency independent, online, double-conversion UPS designed to provide robust power protection for a wide range applications. Both its power and redundancy are expandable by adding units (N2) to create a parallel system. Available in tower or rack configurations. Standard features include standard remote monitoring, simplifying operation from remote or unmanned sites, as well as an RS-232 port and contact interface. Options include a Web-enabled SNMP card.

Features & Benefits

  • Fully-digitized microprocessor control for reliable performance
  • At-a-glance LED display of system status
  • Programmable outlet allows selective shutdown for lower priority loads
  • Quiet operation is ideal for office and medical environments
  • Advanced battery protection
  • Cold start capability
  • Hot swappable batteries
  • Multiple PDU options

Request a quote

 

Product Specifications

GT Series UPS – UL Listed (3kVA)
Single Phase Output Voltage 110V with 208V optional on 3kVA units
Wide input voltage window 80-138V Minimizes battery use, prolongs battery life
Pulse Width Modulation technology Eliminates the need to oversize the UPS
Internal automatic bypass switch Continuous power supply to the load even if the UPS is overloaded
Low input distortion Prevents disturbance to nearby electrical equipment
GT Series UPS – UL Listed (5-10kVA)
Single Phase Output Voltages 120/208V
Wide input voltage window 80-138V Minimizes battery use, prolongs battery life
Redundant and paralleling capability UPS capacity can be increased as site requirements require at no extra cost
Internal automatic bypass switch Continuous power supply to the load even if the UPS is overloaded
No load shutdown Prevents deep battery discharge al low loads
Frequency conversion 60/50Hz Automatic frequency detection

 

Technical Specs (3kVA)

GT Series UPS Technical Specification (3kVA)
MODEL NUMBER GT3000R , GT3000T208
RATING (VA/W) 3000 / 2400 , 3000 / 2400
BATTERY (V/Ah) 2000VA/1200W , 3000VA/1800W
BACKUP TIME @50% LOAD (25°C) 14 min.
OPTION FOR ADDITIONAL BATTERIES Yes
DIMENSIONS (HxWxD) 13.2×43.9×50.3cm (5.2×17.3×19.8in) , 37.3x14x42.4cm (14.7×5.5×16.7in)
NET WGT INCL. BATTERIES (kg / lbs) 34 / 74.9 , 30 / 66
INPUT VOLTAGE @ 100% LOAD (VAC) 80-138 , 160-275
INPUT FREQUENCY (Hz)* 50/60
OUTPUT VOLTAGE 100/110 , 160/208
NUMBER OF OUTLETS (4)NEMA 5-15R , (4)NEMA 6-20R
(1)NEMA L5-20R , (1)NEMA L6-20R
(1)NEMA L5-30R
SNMP COMPATIBILITY Yes
CORE VOLTAGE 120
PWM (PULSE WIDTH MODULATION) Yes
MAINTENANCE BYPASS Yes
INTERNAL BATTERIES Yes
INPUT PERFORMANCE RANGE Voltage (-33 to +17%); Frequency (55 to 65 Hz)
OUTPUT PERFORMANCE
OUTPUT THD LOAD Non-Linear (<6%); Linear (<3%)
VOLTAGE REGULATION LOAD Static (2%); 0-100% Step (8%)
OVERLOAD CAPABILITY 150% for 30 seconds
EFFICIENCY >87%
COMMUNICATIONS INTERFACE RS-232, Plug and Play, open collector alarm contacts
COLOR Front bezel: Aluminum Grey (RAL9006); Cabinet: White (RAL9010)
OPERATING TEMPERATURE 32° F – 104° F (0° C – 40° C)
RELATIVE HUMIDITY 95% non-condensing
AUDIBLE NOISE AT 3.3FT (1 METER) 47 dBA , 42 dBA
SAFETY UL 1778, CSA22.2-107, IEEE 62.41 CAT. A Lightning Safety
EMC FCC Class B (1kVA), FCC Class A (remaining), CISPR PUB. 22 Class A
ENCLOSURE NEMA1

GT Series UPS Technical Specification (5-10kVA)
MODEL NUMBER GT5000 RT GT6000 RT GT8000 RT GT10000 RT
RATINGS :
Power Rating Depending on Input Voltage VA/W VA/W VA/W VA/W
100V / 200V 4000 / 3400 4800 / 3400 6400 / 6400 8000 / 6400
110V / 220V 4500 / 3800 5400 / 3800 7200 / 7200 9000 / 7200
115V / 230V 5000 / 4000 60000 / 4200 8000 / 6900 8700 / 8000
120V / 208V 4800 / 4200 5200 / 4200 8000 / 6900 8700 / 8000
120V / 240V 5000 / 4200 6000 / 4200 8000 / 8000 10000 / 8000
127V / 220V 4800 / 4200 5200 / 4200 8000 / 6900 8700 / 8000
Input Thermal Circuit Breaker (A) 30 60
Internal Input Fuse 250V, Slow (A) Qty 30 30/2
INPUT CONVERTER :
AC Input Voltage Nominal:120/208V
AC Input Voltage Range 100/(173-200), 110/(190-220), 115/(198-230), 120/(208-240), 127/(220) V
Input Current Waveform Sine Wave
Input Current (A) at Nominal Input Voltage 20 40
Input Power Factor >0.97
Input Frequency Range 40 – 70 Hz
Input phase (L1 to L2) 120° / 180° / 240° ±10°
Inrush Current 40
OUTPUT CONVERTER :
AC Output Voltage 100 / 110 / 115 / 120 / 127 V (selectable)
AC Output Voltage Tolerance L-N ± 3%; L1-L2 ± 5% L-N ± 2%; L1-L2 ± 5%
Output Frequency 50 / 60 Hz, auto selection
Output Frequency Range nominal ± 5% with mains synchronizing
Output Waveform Sine wave
Harmonic Distortion < 3% with linear load, < 5% with non-linear full load
Power Factor at Nominal Input Voltage 0.87 0.8 0.86 0.92
Crest Factor (Peak to RMS Current) ≤ 3 : 1
Capacity Appliance Outlets with 55A Terminal Block
BYPASS :
AC Input Voltage Range ± 15% of selected output voltage
Frequency Tracking Rate 1Hz/s
Frequency Tracking Range ± 5% of selected frequency
Typical Transfer Time, msec 0
OVERLOAD CAPABILITY :
Overload Behavior During Battery Operation 130% for 10 seconds
200% for 2 seconds
130% for 1 minute
200% for 5 seconds
Overload Behavior During Bypass Operation Depends on rating of thermal circuit breaker (TCB)
125% of TCB value for 200 seconds
200% of TCB value for 10 seconds
300% of TCB value for 4 seconds
Overload protection
110% of TCB value for 300 seconds
130% of TCB value for 30 seconds
200% of TCB value for 5 seconds
BATTERIES (RATINGS GIVEN FOR 25º C) :
Nominal Voltage(Vdc) 144 288
Qty / Ah (In Battery Kit & Battery Ext. Pack) 12 pcs / 8Ah 24 / 8Ah
Type REW45-12 FR
Recharge Current 1A
Battery Recharge Time (Batt. Discharged at 100% Load) 6 hours for 90% capacity 3 hours for 90% capacity
GENERAL :
Weight UPS 30.3 Kg (67 lbs) 49.3 Kg (109 lbs)
Dimensions UPS (HxWxD) 176x430x592 mm (6.9×16.9×22.55 in) 267x430x660 mm (10.5×16.9×26 in)
Weight Battery Pack 43 Kg (94.7 lbs) 91 Kg (200.4 lbs)
Dimensions Battery Pack 87x430x592 mm (3.47×16.9×2255 in) 173x430x660 mm (6.8×16.9×26 in)
Enclosure / Protection steel-plastic / IP20
Mounting Rackmount or Tower mount with same unit
ENVIROMENT :
Safety Compliance UL 1778
Electromagnetic Compatibility EMI: FCC CFR47 Part 15, class A, ESD:
IEC61000-4-2, level 4
RS: IEC61000-4-3, level 3, EFT: IEC61000-4-4,
level 4, Surge: IEC61000-4-5, level 3
ANSI C62.41 (IEEE587) Category A
(level 3) & B (level 1)
Ambient Temperature 0 to +40ºC
Audible Noise at 3.3 ft. <55 dB(A), load and temperature dependent
Max. Relative Humidity 90% (non-condensing)
Color Black – RAL 9005

1. Due to continuous product improvements, program specifications are subject to change without notice.

 

Industries & Applications

The VH Series UPS is a more powerful solution in a compact footprint for smaller users who have relatively denser power requirements in clinics & hospitals, financial institutions, businesses, and other sites in need of an emergency power supply system. Available in rack or tower platforms and perfect for applications including but not limited to:

  • Smaller data centers, IT systems, or telecom closets with relatively larger power needs
  • Network switching & processing equipment
  • PLC controls
  • High-quality power backup system for AS-400 systems

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

Quiet, compact, and easy to maintain, the office-friendly Digital Energy™ LP11U Series by GE is a high-performance UPS system especially designed to provide protection for a wide range of mission-critical applications in power-dense applications. Full-time double conversion mode—along with true online voltage & frequency independent operation—ensure maximum protection for your industrial UPS system or commercial UPS system. For increased power capacity and/or to ensure redundancy, the proprietary Redundant Parallel Architecture™ enables the LP11U Series to be paralleled to as many as to four units.

Features & Benefits

  • Compact footprint and low noise
  • Easy to maneuver and install
  • Suitable for installation even next to the user
  • Isolation transformer design for ultimate site safety
  • PDU options to suit various output configurations

Request a quote

 

Product Snapshot

Single Phase Output Voltages 120/208/230/240V
Wide input voltage window Minimizes battery use, prolongs battery life
RPA functionality for paralleling and redundancy UPS capacity can be increased as site requirements require at no extra cost
Internal automatic bypass switch Continuous power supply to the load even if the UPS is overloaded
0.8 output power factor Prevents the need to oversize the UPS
0.99 input power factor
Manual automatic bypass switch Integrated as standard to the rear of the UPS
GE’s unique Superior Battery Management Ultimate protection for the UPS core component
High efficiency 91% – 94% (model dependent) Using ECO mode, high efficiency and low losses
No load shutdown Prevents deep battery discharge al low loads
Frequency conversion 50/60Hz Operates as a frequency converter also operating in a parallel system

 

Technical Specs

GE LP-11U Series UPS (5kVA-10kVA) Technical Specifications
MODEL NUMBER LP11U-5 LP11U-5 (120) LP11U-6 LP11U-6 (120V) LP11U-8 LP11U-10
Rating (VA/W) 5000 / 4000 5000 / 4000 6000 / 4800 6000 / 4800 8000 / 6400 10,000 / 8000
Backup Time @ 50% / 100% loads 25 / 10 min. 25 / 10 min. 20 / 8 min. 20 / 8 min. 29 / 11 min. 22 / 8 min.
Enclosure (Table 1) A B A B A A
Net Wgt Incl. Batteries (kg/lbs) 134/295 175/386 134/295 175/386 175/386 186/410
Input Voltage (VAC)
Nominal 208 120 208 120 208 208
Range @ 100% Load (V) 162-285 81-141 162-285 81-141 162-285 162-285
Range @ 50% Load (V) 146-285 72-141 146-285 72-141 146-285 146-285
Input Power Factor .99
Input Frequency (Hz) 40-70
Output Power Factor .8
Output Voltage (VAC) (sinusoidal) 120+208+220/230/240 User Selectable
Output Frequency (Hz) 50/60
Output Voltage Regulation +/- 1%
Output THD at Linear Load <1%
Output THD at Non-linear Load <2%
Crest Factor Handling Capacity of a Non-linear Load 5:1
Overload Capability on Inverter 110% 20 min., 130% 3.5 min., 150% 2 min.
Color Front bezel: Aluminum Grey (RAL9006); Cabinet: Pure White (RAL9010)
Environment IP20 (IEC 60529)
Operating Temperature / Humidity 32° F – 104° F (0° C – 40° C) / 95% Non-condensing
Audible Noise 40-50 dBA – 3.3 feet (1 meter)
Safety Classifications & Listings UL, cUL 1778; CE: EN50091-1-1; EN 60950; IEC 950
EMI FCC Part 15 Class A / EN50091-2
Surge Protection IEC 1000-4-5 (6kV 1.2/50 μsec – 3kA 8/20 μsec) IEEE 587 B, EN 50091-2
Connectivity RS-232; programmable alarm contacts (optional); SNMP (optional)
Warranty 24 Months
1. Due to continuous product improvements, program specifications are subject to change without notice.

 

Industries & Applications

  • Hospitals, clinics, medical centers
  • Government & business offices
  • Police & fire emergency call centers
  • Military applications
  • “Lights-out” or “dark factory” manufacturing
  • Large data centers or IT systems
  • Critical network switching & processing equipment
  • Large-scale PLC controls

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

 

ENERGY STAR® qualified and ideal for both rack-mount and stand-alone installations, the EATON 9PX UPS delivers premium backup power and scalable battery runtimes for servers, voice/data networks, and storage systems. Ergonomically-designed and intuitive graphical LCD interface and robust power management software simplifies managing your industrial UPS system or commercial UPS system— even in virtualized environments.

Features & Benefits

  • Enables you to customize UPS settings, view load and power consumption information through the graphical interactive LCD interface.
  • Fully integrates with Intelligent Power Software Suite for continuous up time of servers and virtual machines.
  • Provides more real power (watts) to protect more equipment and leave room for expanding IT systems.
  • Delivers added runtime with extended battery modules and extends battery service life by 50% with ABM technology.
  • Cuts energy usage and costs with ≥93% efficiency rating in normal mode
  • Maximizes availability with extended battery runtime options, hot-swappable batteries, internal bypass and optional maintenance bypass.
  • Helps save money and protect the environment through energy efficient operation (ENERGY STAR® qualified UPS).
  • Split-phase models offer both 120V and 208V output without a transformer; saving vertical rack (U) space, weight and cost.

Request a quote

Product Snapshot

EATON 9PX UPS
Power Rating 5-11 kVA
Voltage 208V and 120/208V
Frequency 50/60 Hz
Configuration Rack / tower

Technical Specs

GENERAL
Configuration Rack / Tower
Color Black & Silver
Topology Double-conversion online
Diagnostics Full system self test at power up
Rail Kit 4-post rail kit and tower pedestals included; Optional 2-post rail kit available, part number: RK2PC
Remote emergency power off (REPO) ROO and RPO: Rear deck emergency stop connectors (for remote on/off and power off)
ELECTRICAL INPUT
Nominal Voltage 200/208/220/230/240V
Input Voltage Range Full load: 176-276V, Derating: 100-276V
Default voltage 9PX5K and 9PX6K: 208V. 9PX6KG: 230V
Frequency 50/60 Hz
Frequency 50/60 Hz
Frequency range 60 Hz: 50–70 Hz, 50 Hz: 40–60 Hz
Input power factor ≥.99
Input current distortion <5%
Circuit breaker (2) 20A for L6-20R
ELECTRICAL OUTPUT
Power ratings NEMA 5 kVA 200/208/220/230/240V: 5000 VA/4500 watts
Power ratings NEMA 6 kVA 230/240V: 5400 watts

220V: 5100 watts

208V: 4800 watts

200V: 4600 watts

Power ratings IEC 6 kVA 200/208/220/230/240V: 6000 VA/5400 watts
Nominal voltage 208V default (200/208/220/230/240V)
Output voltage regulation ±1% steady-state
Voltage THD <2% for linear loads
Power factor 0.9
Efficiency 93% with resistive load
Transfer time 0 ms
BATTERY
Optional extended battery module (EBM) 9PXEBM180RT
Maximum number of EBMs Add up to 4 EBMs
Battery description Sealed, lead-acid; maintenance free
Battery management ABM technology; 3-stage charging extends battery service life by 50% and provides advance warning for battery replacement
Battery replacement Hot-swappable internal batteries and EBMs
Start on battery Cold-start enabled; first cold start is always forbidden
COMMUNICATIONS
User Interface Graphical display. UPS status in a single view.
LEDs 4 status-indicating LEDs
Communication ports RS-232 (RJ45) ports; USB port as standard (HID). 6-foot RS-232 and USB cables included
Communications card slot Network Card-MS included
Power management software Eaton Intelligent Power Software Suite CD (included)

 

1. Due to continuous product improvements, program specifications are subject to change without notice.


 

Industries & Applications

The EATON 9PX UPS is a more powerful solution in a compact footprint for smaller users who have relatively denser power requirements in clinics & hospitals, financial institutions, businesses, and other sites in need of an emergency power supply system. Available in rack or tower platforms and perfect for applications including but not limited to:

    • Smaller data centers, IT systems, or telecom closets with relatively larger power needs
    • Network switching & processing equipment
    • PLC controls
    • High-quality power backup system for AS-400 systems

Request a quote

Other Uninterruptible Power Supply Models

UPS Models
Part Number Power Rating Input Plug Output Receptacles
(VA/Watts)

120/208V Output, 50/60 Hz Bundles

9PX5KTF5 5000 / 4500 L6-30P** (18) 5-20R, (2) L6-20R, (1) L6-30R
9PX5KP1 5000 / 4500 L6-30P (6) 5-20R, (1) L6-30R, (1) L14-30R
9PX5KP2 5000 / 4500 Hardwired Hardwired
9PX6KSP 5500 / 4900 L14-30P*** (6) 5-20R, (1) L6-30R, (1) L14-30R, Hardwired
9PX6KTF5 6000 / 5400 L6-30P** (18) 5-20R, (2) L6-20R, (1) L6-30R
9PX6KP1 6000 / 5400 L6-30P (6) 5-20R, (1) L6-30R, (1) L14-30R
9PX6KP2 6000 / 5400 Hardwired Hardwired
9PX8KSP 8000 / 7200 Hardwired (1) L6-30R, (2) L14-30R, Hardwired
9PX8KTF5 8000 / 7200 Hardwired (18) 5-20R, (2) L6-30R
9PX10KSP 10000 / 9000 Hardwired (1) L6-30R, (2) L14-30R, Hardwired
9PX11KTF5 11000 / 10000 Hardwired (18) 5-20R, (2) L6-30R
9PX11KTF11 11000 / 10000 Hardwired (8) 5-20R, (2) L14-30R, Hardwired

208V Output, 50/60 Hz Bundles

9PX5K 5000 / 4500 L6-30P** (2) L6-20R, (2) L6-30R, Hardwired
9PX6K 6000 / 5400 L6-30P** (2) L6-20R, (2) L6-30R, Hardwired
9PX6KG 6000 / 5400 Hardwired (8) C13, (2) C19, Hardwired
9PX8K 8000 / 7200 Hardwired (3) L6-30R, Hardwired
9PX8KHW 8000 / 7200 Hardwired Hardwired
9PX11K 11000 / 10000 Hardwired (3) L6-30R, Hardwired
9PX11KHW 11000 / 10000 Hardwired Hardwired

TAA 9PX North American Rack Models: 208V, 50/60 Hz

9PX6KUS 6000 / 5400 L6-30P** (2) L6-20R, (2) L6-30R, Hardwired

 

** Terminal block with L6-30P
*** Terminal block with L14-30P

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

 

The EATON 9155 UPS can serve as a complete industrial UPS system or commercial UPS system, providing premium online backup power and scalable battery runtimes for electrical engineering infrastructure in medium-sized corporate, healthcare, banking, and industrial applications.

A premium emergency power supply system that packs maximum battery runtime into a very small space, the EATON 9155 UPS can be equipped with an integrated, customizable power distribution module that includes a maintenance bypass switch.


Features & Benefits

  • Extraordinary power density delivers a complete emergency power supply system in less space thanks to compact design, internal batteries, and integrated static and manual bypass switches
  • Optimal 0.90 output power factor reduces need to oversize your emergency power supply system
  • Enhanced compatibility with upstream equipment is achieved with active PFC, an extremely efficient 0.99 input power
    factor, and reduced ITHD
  • Proprietary Advanced Battery Management 3-stage charging system enhances backup reliability of your emergency power supply system by significantly extending battery lifetime.
  • Proprietary HotSync technology enables paralleling up to four 9155 UPSs for additional capacity or redundancy in your emergency power supply system
  • Ergonomically-designed and intuitive LCD interface and a wide range of connectivity options enhance the operator efficiency & safety of your emergency power supply system
  • High system efficiency and power density make the EATON 9155 UPS a sustainable solution to your emergency power supply system requirements

Request a quote

 

Product Snapshot

EATON 9155 UPS
Power Rating 8-15 KVA
Voltage 220-230-240V
Frequency 50/60Hz
Configuration Tower
Product Series Powerware

 

Technical Specs

POWER
Ratings (kVA/Watts) 8,10,12 and 15 kVA at 0.9 power factor
Topology True double-conversion online UPS
ELECTRICAL INPUT
Nominal Input Voltage 200V-240V with neutral or with optional transformer
Input Voltage Range -15%, +10% from nominal at 100% load without depleting battery
Operating Frequency 50/60 Hz (45 to 65Hz)
Input Power Factor P.F>0.99 typical, >0.96 frequency converter
Input Current Distortion 5% THD
ELECTRICAL OUTPUT
Nominal Output Voltage 100/200, 110/220, 120/240 Vac 180° phase displacement; 120/208, 127/220 Vac 120° phase displacement
Output Voltage Regulation ±1% Static; ±5% dynamic at 100% resistive load change,<1 ms response time
Efficiency 90% typical
BATTERY
Battery Type 9Ah, sealed, lead-acid, maintenance-free
Battery Runtime See Battery Runtime Chart
Battery Replacement Field-replaceable
Charger Default is 3.4A per battery string. Charger current is configurable from 0.5A to 25A per string with an overall
maximum of 34A (limited by input current)
Start-On-Battery Start-On-Battery Allows start of UPS without utility input
GENERAL
Diagnostics Full system self-test at startup
UPS Bypass Automatic on overload or UPS failure
Parallel for Redundancy and Capacity Yes, using Powerware Hot Sync technology
Dimensions and Weights See Model Selection Table
Overload 150% for 5 sec / 125% for 1 min (online), (Normal Operation) 110% for 10 min
CERTIFICATIONS
Safety Certifications NOM-0190SCFI-1993, UL 1778, CSA C22.2, No. 107.3; EN 5502 Class A (CISPR22 Class A) and IEC 60950;
IEC 62040-1-1
EMC Compliance IEC 62040-2, FCC Part 15, ICES-003, VCCI
Quality ISO 9001: 2000 and ISO 14001:1996
Markings UL, cUL, CSA, CE and NOM-NYCE

 

1. Due to continuous product improvements, program specifications are subject to change without notice.


 

Industries & Applications

A powerful solution for medium-sized banking centers, clinics & hospitals, financial institutions, and other users who require a complete industrial UPS system or commercial UPS system, the EATON 9155 UPS is also rugged & robust enough for demanding marine applications. Perfect for uses including but not limited to:

  • Medium-sized data centers, IT systems, or telecom closets
  • Network switching & processing equipment
  • PLC controls
  • High-quality power backup system for AS-400 systems

 

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

[Formerly Powerware 9170+ UPS] 3KVA – 18KVA Specifically designed for server farms, networks, telecommunications, internet service providers, and other mission-critical applications requiring a high quality power backup system, the EATON 9170+ Network UPS modular UPS system delivers premium online backup power and scalable battery runtimes. N+X redundancy eliminates system-level single point of failure. Battery modules and scalable power ensure superior adaptability to rapidly changing IT environments.

Features & Benefits

  • N+X power and logic redundancy eliminate any possible single point-of-failure
  • Scalable design with 3.0 KVA power modules and batteries accommodates evolving IT environments
  • Proprietary ABM technology significantly increases battery life for more uptime and fewer battery replacements
  • Sophisticated software conditions incoming power without depleting the battery, thus preserving power for complete power outages
  • Hot-swappable, lightweight battery modules simplify setup and service
  • Ergonomically-designed and intuitive and intuitive LCD screen quickly collects information on critical operating parameters and simplifies the user experience

Request a quote

 

Product Snapshot

EATON 9170+ UPS
Power Rating 3-18 kVA
Voltage 200-240V
Frequency 50/60 Hz
Configuration Tower/Rackmount
Product Series Powerware

 

Technical Specs

GENERAL
Topology True online, double-conversion
Diagnostics Full system self-test on power up
UPS Bypass Automatic on overload or UPS failure
ELECTRICAL INPUT
Voltage 208-240 VAC or 200/100, 208/120, 220/110,240/120 Vac
Input Voltage Range 176-276 V
Input Power Factor .98
Frequency 50/60 Hz (± 3Hz)
ELECTRICAL OUTPUT
On Utility Voltage Regulation ±3% of nominal
On Battery Voltage Regulation ±3% of nominal
Efficiency 88% normal operation

97% High performance (optional programmable)

Frequency Regulation ±3 Hz online; ±0.1 Hz on battery
COMMUNICATIONS
LCD Display 4 x 20 character backlit display, programmable
Language Support English, French, Spanish and German
Communication ports RS232, (DB9) (std)
Communication slots 2 Slots (standard)
SNMP capability SNMP/Web enabled card options
Contact Closures Relay Card option
Emergency Power off (EPO) Input for external EPO
BATTERY
Internal Battery Type Sealed, lead-acid; maintenance free
Battery Runtime See Battery Runtimes below
Battery Replacement Hot-swappable
Recharge Time <4 hours standard
ENVIROMENTAL & SAFETY
Safety Markings UL, CUL
EMC Markings FCC class A
Surge Suppression IEEE/ANSI C62.41
Audible Noise <50dBA
Ambient Operating / Storage Temperature 0 to 40ºC (32 to 104ºF)/-20 to 40ºC (60ºC w/o batt) -4 to 104ºF (140º F w/o batt)
Relative Humidity 50 to 90%, non-condensing
REPO Port Meets NEC code 645-11 intent and UL requirements

 

1. Due to continuous product improvements, program specifications are subject to change without notice.


 

Industries & Applications

The EATON 9170+ is designed for medium-sized server farms and networks, telecom and internet service providers, clinics & hospitals, financial institutions, and other mission-critical applications requiring a high quality power backup system. Perfect for uses including but not limited to:

  • Medium-sized data centers, IT systems, or telecom closets
  • Network switching & processing equipment
  • PLC controls
  • High-quality power backup system for AS-400 systems

Request a quote

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.