Ideal for servers supporting varying load levels, the IT Series by GE is a robust commercial UPS system or industrial UPS system for providing cost-effective protection against power outages, voltage fluctuations, and transient surges for sensitive equipment. Line-interactive with automatic voltage regulation (AVR) to ensure sine wave purity, it’s available in both tower and 19-inch rack formats. Standard features include hot-swappable batteries, RS232 and USB communication ports, and a RJ11 port for telephone/modem protection. Product warranty is a full two years.

Features & Benefits

  • High efficiency at all loads
  • Can operate between 0°C to 40°C
  • Advanced battery protection
  • Hot-swappable batteries
  • Regular automatic battery test
  • Short circuit and overload protection
  • Cold start
  • 50/60 auto-sensing—can be used as a frequency converter
  • Energy-saving eco-friendly 95 percent efficiency
  • At-a-glance LED display of system status

Request a quote

Product Specifications

Single Phase Output Voltages 125V
50/60 auto-sensing Can be used as a frequency converter
95% efficiency Low losses and greater energy savings
Intelligent LED display Quick visual of UPS, load and battery status
Wide operating temperature UPS can operate between 0°C to 40°C

 

Technical Specs

GE IT Series UPS Technical Specifications
MODEL NUMBER UPS0600ITSIT , UPS1000ITSIT , UPS1500ITSIT , UPS2000ITSIT
POWER RATING OUTPUT CAPACITY 600VA / 360W , 1000VA / 600W , 1500VA / 900W , 2000VA / 1200W
POWER FACTOR OUTPUT POWER FACTOR 0.6 pf
INPUT VOLTAGE
FREQUENCY
INPUT POWER CONNECTION
120V +/- 10% at line input, single phase
50 or 60 Hz +/- 5Hz auto-sensing
Detachable 5-15P , Detachable 5-15P , Hardwired 5-15P , Hardwired 5-20P
OUTPUT VOLTAGE (on battery)
VOLTAGE (on mains)
VOLTAGE THD
FREQUENCY (on battery)
VOLTAGE REGULATION (AVR)OUTPUT RECEPTACLES – POWER DISTRIBUTION
Pure sine wave at +/- 5% of nominal, -10% of nominal after low battery warning
120V, -12%/+10%
< 5% @ 100% resistive load with 80% battery capacity
50 or 60 Hz +/- 5% auto-sensing
AVR automatically increases (boost) output voltage 17% above input voltage if -9% to -25% of nominal.
AVR decreases (buck) output voltage 14% below input voltage if +9% to +25% of nominal.(4) 5-15R , (4) 5-15R , (6) 5-15R , (6) 5-15R
PROTECTION & FILTERING SPIKE PROTECTION
EMI/RF FILTER
OVERLOAD PROTECTION
TRANSFER TIME
SHORT CIRCUIT
780 Joules/6500A
10dB @ 0.15MHz, 50 dB @ 30 MHz
UPS automatic shutdown if overload exceeds 110% of nominal @ 20 seconds and 125% @ 5 seconds
4/6 milliseconds (typical), including detection time
Active protection with automatic shutdown
BATTERY SYSTEM TYPE
BATTERY
TYPICAL RECHARGE TIME
PROTECTION
BATTERY QUANTITY
Hot swappable, sealed Valve Regulated Lead Acid (VRLA)
12V / 9.0 AH
4 hours (to 90% of full capacity)
Automatic self-test and discharge protection, Replace battery indicator
2 pcs , 2 pcs , 3 pcs , 4 pcs
NET WEIGHT(lbs)
DIMENSIONS WxDxH(inches)
30.4 lbs , 33.0 lbs , 55.0 lbs , 66.0 lbs
5.5″ x 17.2″ x 8.3″ , 5.5″ x 17.2″ x 8.3″ , 6.7″ x 17.7″ x 8.9″ , 6.7″ x 17.7″ x 8.9″
COMMUNICATIONS RS-232
USB
SNMP
OPERATING SYSTEM
Standard (Detect battery low, schedule UPS on/off, AC Input/Output power status display)
Standard
Optional
Windows NT, Windows 2000/ME, Windows XP, Linux
ENVIRONMENT AMBIENT OPERATION
AUDIBLE NOISE @ 1 METER
STORAGE CONDITION
3,500 meters max. elevation, 0-95% RH non-condensing, 0-40°C
< 40 dBA , < 45 dBA
15,000 meters max. elevation, 0-95% RH non-condensing, 0-40°C
CERTIFICATIONS UL, cUL, FCC Class A

1. Due to continuous product improvements, program specifications are subject to change without notice.

 

Industries & Applications

The IT Series by GE is an ideal battery backup power supply for one- or two-rack users in clinics & hospitals, financial institutions, businesses, and other sites in need of a commercial UPS system that offers superior online power quality and scalable battery runtimes in applications including but not limited to:

  • Smaller data centers, IT systems, or telecom closets
  • Network switching & processing equipment
  • PLC controls
  • High-quality power backup system for AS-400 systems

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

The Digital Energy™ VH Series by GE is a true-voltage, frequency-independent, double conversion, online UPS system designed to provide robust protection against voltage fluctuations and power outages for datacenter, telecom, laboratory, and mission-critical applications. Available in either tower or rack design, the VH Series has a 0.9 power factor and comes with a standard three-year warranty.

Features & Benefits

  • High efficiency at all loads
  • Can operate between 0°C to 40°C
  • Advanced battery protection
  • Hot-swappable batteries
  • Regular automatic battery test
  • Short circuit and overload protection
  • Cold start
  • Energy-saving eco-friendly 95 percent efficiency
  • At-a-glance LED display of system status

Request a quote

 

Product Specifications

Unique failsafe internal bypass Continued operation even with overload or over-temperature
2U design for all ratings Small footprint; parts supplied for tower or rack assembly
Hot swappable batteries Simple, fast battery replacement without disruption to the load
Matching battery cabinets Longer battery life available with the addition of extra battery cabinet(s)
Superior battery management Provides protection to the battery and extends the battery life
Remote monitoring Easy access and control even for unmanned or isolated sites
MTBF >730,000 hours Proven reliability
Increased power handling 0.9 output power factor delivers more actual power to the load

 

Technical Specs

GE VH Series UPS Technical Specifications
VH SERIES 700 , 1000 , 1500 , 2000
Voltage Amperes (VA) with computer type load
Watts (W) with resistive load
700 , 1000 , 1500 , 1920
630 , 900 , 1350 , 1740
INPUT CONVERTER
AC input voltage
Input current waveform
Input current (A) at nominal input voltage
Input power factor
Input frequency range
Inrush current
60 – 140V
Sinusoidal, EN 61000-3-2(IEC 555-2) compliant
6.6 , 9.1 , 13.9 , 16
1
45-66
none
OUTPUT CONVERTER
AC output voltage
Output frequency
Output waveform
Power Factor
Capacity appliance outlets
100 / 110 / 115 / 120 / 127V (selectable)
Auto selectable or 50/60 Hz, front selectable
Sine wave
0.9
max. 20A per outlet (+1 high power outlet max. 20A, on 2000VA model only)
BYPASS
AC input voltage range
Frequency tracking rate
Frequency tracking range
Phase difference
Typical transfer time, msec
Selected output voltage -15% to +10%
“2 Hz / sec
nominal ±10% / ±2% selectable
<1° typical (max.7° during tracking frequency range)
1
BATTERIES (rating given for 77°F)
Nominal voltage (Vdc)
Number / Ah batteries
Type
Service life
Recharge current
Battery recharge time (batt. discharge at 100% load)
Runtime in minutes at typical load (75%)
36 , 36 , 72 , 72
3/7 , 3/9 , 6/7 , 6/9
Sealed lead acid , maintenance free
up to 6 years (depending on use)
1.5 A
3 hours for 90% capacity, std battery
12 , 12 , 11 , 12
GENERAL
Weight UPS (lbs/kg)
Dimensions UPS (HxWxD)Enclosure / protection
35/16 , 37/17 , 64/29 , 71/32
3.4×17.2×18.5 inch , 3.4×17.2×21.3 inch
87x438x470 mm , 87x438x540 mm
steel-plastic / IP20
ENVIROMENT
Safety
Electromagnetic compatibility
Ambient temperature
Audible noise at 1 meter
Max. relative humidity
UL 1778, 4th Edition
EN 62040-2
32 to 104°F (o to +40°C)
< 45 dB(A), load and temperature dependent
95% (non-condensing)

 

Industries & Applications

The VH Series UPS is a more powerful solution in a compact footprint for smaller users who have relatively denser power requirements in clinics & hospitals, financial institutions, businesses, and other sites in need of an emergency power supply system. Available in rack or tower platforms and perfect for applications including but not limited to:

  • Smaller data centers, IT systems, or telecom closets with relatively larger power needs
  • Network switching & processing equipment
  • PLC controls
  • High-quality power backup system for AS-400 systems

Request a quote

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

The EATON 5PX is a high-quality power backup system that delivers the extra capacity to protect more equipment while leaving room for future expansion of your IT system. The cost-effective and Earth-friendly design boasts 99 percent efficiency and is ENERGY STAR® qualified. Graphic LCD screen interface allows you to customize UPS settings, view load & power consumption, and more. Paired with the Eaton Intelligent Power Software Suite, the EATON 5PX maximizes uptime by allowing you to seamlessly manage your connected equipment—even in virtualized environments.

Features & Benefits

  • Delivers the extra capacity to protect more equipment while leaving room for future expansion of your IT system
  • Cost-effective and Earth-friendly design boasts 99 percent efficiency and is ENERGY STAR® qualified.
  • Graphic LCD screen interface allows you to customize UPS settings, view load & power consumption, and more.
  • Maximizes uptime by allowing you to seamlessly manage your connected equipment, even in virtualized environments when paired with the Eaton Intelligent Power Software Suite.
  • Optional external battery modules can extend runtime
  • Load shedding, remote reboot of individual equipment, and sequential startup provided by individually controlled outlets.
  • Can be integrated with Eaton network closet solutions.
  • Compact 1U and 2U configurations conserve valuable rackmount space.
  • Proprietary ABM Technology extends battery service life by as much as 50 percent.
  • Three-year warranty includes battery

Request a quote

 

Product Snapshot

Product Snapshot
Power Rating 1000-3000 VA
Voltage 100-127 Vac, 200-240 Vac
Frequency 50/60 Hz
Configuration Rack/Tower
Extended Runtime Capabilities Yes. For a solution without extended runtime, see the 5P UPS

 

Industries & Applications

  • Smaller data centers, IT systems, or telecom closets with relatively larger power needs
  • Network switching & processing equipment
  • PLC controls
  • High-quality power backup system for AS-400 systems

Request a quote

Other Uninterruptible Power Supply Models

UPS Models
Part Number Power Rating Input Plug Output Receptacles
(VA/Watts)

5PX 120V, 50/60 Hz Models

5PX1000RT 1000 / 1000 5-15P (8) 5-15R
5PX1500RT 1440 / 1440 5-15P (8) 5-15R
5PX2200RT 1950 / 1920 5-20P (8) 5-20R
5PX3000RT2U 3000 / 2700 L5-30P (6) 5-20R, (1) L5-30R
5PX3000RT3U 3000 / 2700 L5-30P (6) 5-20R, (1) L5-30R

5PX 120V, 50/60 Hz Virtualization-ready bundles with Network Card-MS

5PX1500RTN 1440 / 1440 5-15P (8) 5-15R
5PX2200RTN 1950 / 1920 5-20P (8) 5-20R
5PX3000RTN 3000 / 2700 L5-30P (6) 5-20R, (1) L5-30R

5PX 208/230V, 50/60 Hz Models

5PX1500iRT 1500 / 1350 C14 (8) C13
5PX2200iRT 2200 / 1980 C20 (8) C13, (1) C19
5PX3000iRT2U 3000 / 2700 C20 (8) C13, (1) C19

5PX 208/230V, 50/60 Hz Virtualization-ready bundles with Network Card-MS

5PX3000iRTN 3000 / 2700 C20 (8) C13, (1) C19

TAA 5PX North American Rack Models: 120V, 50/60 Hz

5PX1500RTUS 1440 / 1440 5-15P (8) 5-15R
5PX2200RTUS 1950 / 1920 5-20P (8) 5-20R
5PX3000RT2US 3000 / 2700 L5-30P (6) 5-20R, (1) L5-30R

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

[Formerly Powerware FERRUPS Tower UPS]
Ideal for demanding applications such as 911 centers, global military installations, marine vessels, and other mission-critical applications that demand a high quality power backup system, the EATON FERRUPS TOWER UPS continually regulates voltage and eliminates harmful harmonic currents while providing unsurpassed performance as an industrial UPS system or a commercial UPS system. Featuring scalable runtimes and proven ferroresonant battery backup power, the EATON FERRUPS is highly configurable with a wide range of voltages, frequencies, runtimes, power cords, and receptacles.

Features & Benefits

  • Converts power from almost any AC source into computer-grade power
  • Ferroresonant technology closely monitors sine wave purity
  • External battery cabinets prolong backup time
  • Incoming power is conditioned without depleting the battery, thereby conserving battery power for complete power outages
  • Customizable receptacles, input plugs, voltage-matching transformers, and bypass switches provide compatibility with virtually any application
  • Provided with free software bundle that includes LanSafe and FORESEER network monitoring software to ensure highest levels of data integrity

Request a quote

 

Product Snapshot

EATON FERRUPS UPS
Power Rating 500 VA to 18KVA
Voltage 120/208/240
Frequency 60 Hz
Configuration Tower
Product Series Powerware

 

Technical Specs

GENERAL
Models 850VA / 1.4kVA / 3.1kVA / 5.3kVA
Capacity (kVA/kW) .85/.6, 1.4/1, 3.1/2.2, 5.3/3.7
Dimensions (inches)

HxWxD (mm)

12x10x21.25 / 15.1×15.2×20.2 / 21.2×15.25×22.9 / 29.5×15.5×25

305x255x540 / 385x390x515 / 540x390x585 / 36.5x19x32

Typical (Full Load) 11 / 14 / 14 / 20
Runtime: (Half Load)(minutes) 28 / 37 / 35 / 50
OPERATION
Nominal Input Voltage 102/208/240
Input Voltage Range +15%, -20%
Operating Frequency 60 Hz Nominal (adjustable limits +_ 0.01 Hz to +_ 3Hz
Nominal Output Voltage 102/208/240
Output Voltage Regulation

Output Voltage Waveform

± 3% for input voltages of +15% to -20%

Sine wave

Output Voltage THD 5% or less at rated kW load
Overload Capacity 150% surge and 125% for10 min. on line, 150% surge and 110% for 10 minutes on inverter
Transfer Time 0 ms
Lightning, Surge & Noise Protection 2000:1 spike attenuation using ANSI/IEEE C62.41 and C62.45 Category A and Category B tests.
Common Mode – >120 dB. Normal Mode – >60dB
Efficiency 85 / 88 / 91 / 90
Safety Certification UL, CSA (cUL), Complies with European Low Voltage Directive 73/23/EEC
EMI Compliance FCC Class A, Complies with European Electromagnetic Compatibility Directve 89/336/EEC
Testing Standards ANSI/EEE C62.41 (1991); ANSI/EEE C62.45 (2002); EN62040-2
Communication RS-232 serial port (DB-25), plus contact closures
ENVIROMENTAL
Operating Temperature 0 to 40° C
Storage -20° C to +60° C
Relative Humidity 0 to 95% without condensation
Audible Noise at 1m 47 / 49 / 51 / 51
Altitude 3, 050m (10,000 ft.) maximum

 

1. Due to continuous product improvements, program specifications are subject to change without notice.


 

Industries & Applications

EATON FERRUPS TOWER UPS
500VA – 850VA & 1.4kVA – 18kVA

The EATON FERRUPS TOWER UPS is purpose-engineered for demanding applications such as 911 centers, global military installations, marine vessels, and other mission-critical applications that demand an industrial UPS system that is also a high quality power backup system for sensitive equipment. Applications include but are not limited to:

  • Police & fire emergency call centers
  • Military applications
  • “Lights-out” or “dark factory” manufacturing
  • Large data centers or IT systems
  • Critical network switching & processing equipment
  • Large-scale PLC controls

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

 

Packing up to 3.0 KVA into only 2U of rack space, the EATON 9130 Rackmount UPS delivers superior online power quality and scalable battery runtimes for rack servers, voice and data networks, storage systems, and other IT equipment that require the protection of an uninterruptible power supply. Proprietary ABM technology significantly extends battery life while an efficiency rating of >95% reduces your energy costs. Ergonomically designed bright LCD user interface simplifies operation and monitoring.

 


Features & Benefits

  • High Efficiency mode with >95% efficiency rating reduces energy usage and costs
  • 2U form factor, 4-post rail kit, and internal batteries save rack space
  • Higher wattage with a 0.9 power factor protects more equipment and allows for expanding IT systems
  • Ergonomically-designed and intuitive LCD user interface and intuitive power-management software simplify the monitoring of your commercial UPS system or industrial UPS system.
  • Available remote monitoring and management with optional eNotify Remote Monitoring service
  • Proprietary ABM battery-charging technology and hot-swappable batteries increase battery service life and system uptime

Request a quote

 

Product Snapshot

EATON 9130 UPS
Power Rating 700-3000 VA
Voltage 120 Vac, 208-240V
Frequency 50/60Hz (auto-sensing)
Configuration Rackmount or tower
Product Series Powerware

 

Technical Specs

GENERAL
User interface Graphical LCD with blue backlight and text in English, French, German, Russian and Spanish
LEDs Four status-indicating LEDs
Topology True online, double-conversion
Diagnostics Full system self-test
UPS bypass Automatic bypass
Dimensions >> Contact an FGC representative for more information <<
Rail kit Included with all rackmount units
ELECTRICAL INPUT
Nominal Voltage 120V: 208–240V
Input Voltage Range 120V: 90–138 Vac (with load PF of 0.7) 208/230V: 160–276 Vac (with load PF of 0.7)
Power draw of UPS 700: 5.8A @120V, 3.4A @208V, 3.0A @230V
1000: 8.3A @120V, 4.8A @208V, 4.3A @230V
1500: 12.5A @120V, 7.2A @208V, 6.5A @230V
2000: 16.6A @120V, 9.6A @208V, 8.7A @230V
2500: 20.8A @120V, 12.0A @208V, 10.9A @230V
3000: 25.0A @120V, 14.4A @208V, 13.0A @230V
Dedicated circuit breaker rating 120V:
700–1500 VA: 15A
2000 VA: 20A
2500–3000 VA: 30A
208/230V:
700–2000 VA: 10A
3000 VA: 16A
Frequency 50/60 Hz
Frequency range 45–65 Hz
ELECTRICAL OUTPUT
Power factor 0.9
On utility voltage regulation ±3% of nominal
On battery voltage regulation ±3% of nominal
Efficiency >95% in high-efficiency mode; >86% in online mode
Frequency regulation ±3% Hz online
Load crest factor 3 to 1
BATTERY
Battery Type VRLA 12V/9 Ah (both internal and external)
Battery Runtime >3 minutes with internal batteries @100% load (0.7 PF)
Battery Replacement Hot-swappable internal and external batteries
Start-on-battery Allows start of UPS without utility input
COMMUNICATIONS
Serial port RS-232 standard, for interface to power management software
USB port HID standard, for communicating with Windows 98 and ME computers
Relay output Common alarm standard
Communications slot Optional communication slots (BD Slot)
Optional communication cards SNMP/Web card for direct control and monitoring in SNMP-based networks, monitoring of UPS status
and meters through Web browser interface Relay card for integration to industrial environment and
building management systems, remote shutdown for IBM AS/400 systems

 

1. Due to continuous product improvements, program specifications are subject to change without notice.


 

Industries & Applications

The EATON 9130 is an ideal battery backup power supply for one- or two-rack users in clinics & hospitals, financial institutions, businesses, and other sites in need of a commercial UPS system that offers superior online power quality and scalable battery runtimes in applications including but not limited to:

  • smaller data centers, IT systems, or telecom closets
  • Network switching & processing equipment
  • PLC controls
  • High-quality power backup system for AS-400 systems

Request a quote

 

Other Uninterruptible Power Supply Models

UPS Models
Part Number Power Rating Input Plug Output Receptacles
(VA/Watts)

North American Tower Models

PW9130L700T 700 / 630 5-15P (6) 5-15R
PW9130L1000T-XL 1000 / 900 5-15P (6) 5-15R
PW9130L1500T-XL 1500 / 1350 5-15P (6) 5-15R
PW9130L2000T-XL 2000 / 1800 5-20P (4) 5-20R, (1) L5-20R
PW9130L3000T-XL 3000 / 2700 L5-30P (4) 5-20R, (1) L5-30R

9130 Global Tower Models

PW9130G2000T-XL 2000 / 1800 L6-20P (4) 6-20R, (1) L6-20R
PW9130G2000T-XLEU 2000 / 1800 L6-20P (8) C13, (1) C19
PW9130G3000T-XL 3000 / 2700 L6-20P (2) 6-20R, (1) L6-20R, (1) L6-30R
PW9130G3000T-XLEU 3000 / 2700 L6-20P (8) C13, (1) C19

9130 INTERNATIONAL TOWER MODELS: 230V, 50/60 Hz

PW9130i700T 700 / 630 C14 (6) C13
PW9130i1000T-XL 1000 / 900 C14 (6) C13
PW9130i1500T-XL 1500 / 1350 C14 (6) C13
PW9130i2000T-XL 2000 / 1800 C14 (8) C13, (1) C19
PW9130i3000T-XL 3000 / 2700 C20 (8) C13, (1) C19

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.