The 1600 Series is tower-design, double-conversion online industrial UPS system or commercial UPS system that can supply clean, uninterrupted power to mission-critical loads over large input voltage deviations—without resorting to battery backup. Wide input voltage and frequency windows maximize generator compatibility. Input power factor is greater than 95 percent with an output power factor of 85 percent. LCD touch-screen display for easy UPS monitoring and control. Options include network interface card (RemotEye® II) environmental monitoring device. Available in 3.6, 6.0, 8.0, 10.0, 14, 18, and 22 KVA.

Features & Benefits

  • Digital LCD touchscreen display
  • Hot swappable batteries
  • Internal isolation transformer
  • Wide input voltage & frequency windows
  • Input power factor > 95 percent
  • Power factor correction
  • Output power factor 85 percent
  • Optional network interface card for remote monitoring/control
  • Optional external battery cabinets
  • Optional environmental monitoring device

Request a quote

 

Technical Specs

1600XP/XPi Specifications Spreadsheet
Capacity
3.6 KVA
(3.1 KW)
6 KVA
(5.1 KW)
8 KVA
(6.8 KW)
10 KVA
(8.5 KW)
14 KVA
(11.9 KW)
18 KVA
(15.3 KW)
22 KVA
(18.7 KW)
Topology
True On-Line, Double Conversion; IGBT Power Factor Corrected Input; Internal Isolation Transformer
Certifications
UL 1778, CUL, CE, FCC Class A, IEEE 587, ANSI/C62.41, ISO 9001, ISO 14001, NEMA/PE1-1993, RoHs
Input Characteristics
Input Voltage
(Based on Typical 70% Load)
Single-Phase 208/240 VAC (Three-Wire Input/L-L, G); 230 VAC (Three-Wire Input/L, N, G), +10% -30%
Input Frequency
45 to 65 Hz (Auto-Sensing)
Input Power Factor
> 0.95 For All Loads
Input Current THD
< 5% (Even for 100% Non-Linear Loads)
AC Input Breaker Rating
30 A
50 A
60 A
63 A
100 A
100 A
125 A
Battery Characteristics
Battery Type
Valve-Regulated Lead Acid; Flame Retardant (9.0 Amp Hr)
Backup Time (Fully Charged)
7 Minutes
7 Minutes
7 Minutes
5 Minutes
7 Minutes
5 Minutes
3 Minutes
0.85 Power Factor; 77° F; Approximately 30% More Runtime for Output Power Factor of 0.7 (Triple Backup Time at ½ Load)
Recharge Time
24 Hours (Full), 12 Hours (90%)
DC Link
144 VDC
216 VDC
288 VDC
Output Characteristics
Output Voltage
Single-Phase 240/208/120 VAC (Four-Wire Output/L-L, N, G) 230 VAC (Three-Wire Output L, N, G)
Output Voltage Regulation
3%; ±1% Typical
Output Frequency
50/60 Hz; ±0.5 Hz/1.0 Hz/1.5 Hz (Factory or Authorized Service Center Selectable)
Output Voltage THD
< 3% for Linear Load; 1% Typical
Common Mode Noise
< 0.5 V RMS
Rated-Load Power Factor
0.85 (0.6 to 1.0) Lag
Rated Output Current @ 240 V
15 A
25 A
33.3 A
41.6 A
58 A
75A
91.6 A
Maximum Peak Output Current
45 A
75 A
100 A
125 A
174 A
225 A
275 A
Overload Capacity
Inverter Mode: 150% for 10 Seconds, 125% for 30 seconds; Bypass Mode: 125% for 10 Minutes, 1000% for One Cycle
Environmental Characteristics
Efficiency (AC-DC-AC)
> 85%
Temperature Range
0 to 40°C (Operating); -20° to +40°C (Storage)
Heat Generation (BTU/Hr)
1843
3071
4095
5118
7168
9213
11,260
Altitude
6600 Feet (2000 Meters) Maximum Without Derating
Audible Noise
< 60 DBA @ 1 Meter
Mechanical Design
Enclosure
Steel Enclosure; Complies with NEMA 1 and UL Type-1 Standard
Enclosure Dimensions (HxWxD)
22.1″ x 10″ x 33″
27.5″ x 10″ x 33″
28.4″ x 13″ x 34.9″
39.1″ x 17.5″ x 36.1″
Shipping Weight
280 lb/127 kg
346 lb/157 kg
476 lb/214 kg
784 lb/355 kg
784 lb/355 kg
835 lbs/379 kg
Battery Pack Size (HxWxD)
5″ x 7.3″ x 19″ (Battery Pack Part # 51896-FS)
Battery Pack Quantity
Two
Three
Four
Eight
Additional Key Features
Output Isolation Transformer, RS232 & Dry Contact Interface, Crest Factor of 3, Angled Terminal Blocks for Easy Installation, Casters for Mobility
Options
SNMP & WEB-Based Monitoring
RemotEye® III, RemotEye® 4, RemotRadar™, & Environmental Monitoring Device
Matching Battery Cabinet
Consult Factory
Internal/External Maintenance Bypass
Consult Factory
Receptacle Panel & Line Cord
Consult Factory
Warranty
Three Years on Electronics (UPS); Two Years on Battery (See Toshiba Warranty Policy for Full Details)

 

Industries & Applications

  • Industrial Systems
  • Health Care
  • Laboratories
  • Small Business Offices
  • Point-of Sale Equipment
  • Internet Service Provider
  • Server Consolidation
  • Datacenters
  • Storage
  • Wiring Closets

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

The 1000 Series is a single-phase double-conversion, true online uninterruptible power system that’s available in both tower and rackmount designs. Features include auto-restart and cold start, programmable load-shed receptacle,
intelligent charger with rapid charge in only 4.0 hours to 90 percent. Wide input voltage and frequency windows maximize generator compatibility. Input power factor is greater than 97 percent with an output power factor of 70 percent (0.8 PF for 2.4 KVA). LCD displays in multiple languages. Options include network interface card (RemotEye® II) environmental monitoring device. Available in 1.0, 1.5, 2.0, 2.4, 3.0, and 6.0 KVA.

Features & Benefits

  • Auto-restart and cold start
  • Programmable load-shed receptacle
  • Intelligent charger with rapid charge in only 4.0 hours to 90 percent
  • Wide input voltage window
  • Wide input frequency window for comp generator compatibility
  • Input power factor > 97 percent
  • Output power factor 0.70 (0.8 PF for 2.4KVA)
  • LCD display in multiple languages
  • Optional network interface card – RemotEye® II
  • Optional environmental monitoring device

Request a quote

Technical Specs

1000 Series Specifications
Category
1000 Series
1000+ Series
Size
1000 VA
1500 VA
2000 VA
3000 VA
6000 VA
1000 VA
2400 VA
Tower US 120V Model
UT1A1A010C6
UT1A1A015C6
UT1A1A020C6
UT1A1A030C6
UT1A1A010C6T
UT1G2L024C6T
International 230V Model
UT1E1E010C6
UT1E1E015C6
UT1E1E020C6
UT1E1E030C6
Rackmount (2U) US 120V Model
UT1A1A010C6RKB2
UT1A1A015C6RKB2
UT1A1A020C6RKB2
UT1A1A030C6RKB2
International 230V Model
UT1E1E010C6RKB2
UT1E1E015C6RKB2
UT1E1E020C6RKB2
UT1E1E030C6RKB2
UT1G1G060C6RKB3 + UT1-BR-0607
Input Voltage
120 VAC (80 – 144 V, +20% to -33%)
120 VAC
Single-Phase 208/240 VAC (Three-Wire Input/L-L, G) (160 – 276 V, +15% to -34%)
Voltage (International)
230 VAC (161 – 276 V, +20% to -30%)
Capacity (VA)
1000 VA
1500 VA
2000 VA
3000 VA
6000 VA
1000 VA
2400 VA
Capacity (W)
700 W
1050 W
1400 W
2100 W
4200 W
700 W
1920 W
Frequency
50 / 60 Hz auto sensing
Power Factor
Greater than 0.97
Topology
True on-line, Double conversion, Input PF correction
True on-line, Double conversion, Input PF correction Isolation Transformer
Output Voltage
100/110/115/120/127 VAC
100/110/115/120/127 VAC
120/200/208/220/230/240 VAC
Voltage (International)
208/220/230/240 VAC
Frequency
50 / 60 Hz auto sensing
Wave Form
Sine wave, zero transfer time
Load Power Factor
0.7
0.8
Efficiency AC/DC/AC
Greater than 86%
> 89 %
> 86%
> 87%
Rated Current
8.3 A
12.5 A
16.6 A
25 A
8.3 A
10A (240V)
Rated Current (International)
4.3 A
6.5 A
8.7 A
13 A
25 A (240V)
Overload Capacity
125% for 1 min, 130% for 10 sec
Crest Factor
3.0 at full load
Battery DC Voltage (Tower & 2U)
36 V / 12 V 9 AH x 3
72V / 12 V 9AH x 6
240V 12V x 20
36 V / 12 V 9 AH x 3
72V / 12 V 9AH x 12 (2 strings)
Backup Time (Tower & 2U)
7 min (full load)
6 min (full load)
6 min (full load)
5 min (full load)
7 min (full load)
11 minutes
Type
Valve-Regulated Lead Acid; Flame Retardant (9.0 Amp Hr)
Physical Interface
RS-232 and USB standard, Remote Contact, RemotEye II© and EMD option
Dimensions Tower (L X W X H)
16.5″ x 6.0″ x 9.4″
16.7″ x 8.9″ x 14.2″
23.3″ x 6.0″ x 9.4″
23.2″ x 10.1″ x 27.6″
Dimensions 2U (L X W X H)
16.7″ x 16.9″ x 3.5″
25.0″ x 16.9″ x 3.5″
16.8Lx23.5Wx10.5H (6U)
Weight (Tower/2U)
35.6 lbs / 37.6 lbs
37.4 lbs / 37.6 lbs
68.4 lbs /69.5 lbs
72.6 lbs / 71.5 lbs
148 lbs
51 lbs
154.3 lbs
Line Cord
5-15P
5-20P
L5-30P
5-15P
Hardwire or Optional L6-20P
Line Cord (International)
IEC 320
Hardwire & L6-30P
Receptacles (Tower/2U)
NEMA 5-15R (6/6)
NEMA 5-20R (12/4)
L6-30R (2)
NEMA 5-15 (6)
Hardwire/Optional (3) 5-20R or (2) L6-20R & (1) 5-20R Duplex
Receptacles (Tower/2U) International
IEC 320 C13 (4/4)
IEC 320 C13 (4/4)
IEC 320 C13 (8/4)
IEC 320 C13 (8/4)
Environment Operating Temperature
0 – 40oC (32 – 104oF)
Altitude
11500 ft (3500 m) above sea level
Warranty
Three years on electronics
Two years full replacement on battery (See Toshiba warranty policy for full details.)

 

Industries & Applications

  • Industrial Systems
  • Health Care
  • Laboratories
  • Small Business Offices
  • Point-of Sale Equipment
  • Internet Service Provider
  • Server Consolidation
  • Datacenters
  • Storage
  • Wiring Closets

Request a quote

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.