Riello Master HP UL
65,000-500,000 VA Three Phase
Uninterrupted Quality Power For Mission Critical Applications.
HIGHLIGHTS
- IGBT-based rectifier technology
- Compact and reliable
- Galvanic isolation
- High overload capacity
The enhanced levels of quality, reliability and energy savings offered by the Master HP range of UPS have been extended to include a 480 Vac – 60 Hz version, certified as UL/CSA, with power ratings from 65 KVA to 500 Kva, in single module or parallel configuration.
IT managers, facility managers, and CTOs are under increasing pressure to reduce downtime and assure that their critical loads are supplied with uninterrupted and high quality power.
With this increasingly stringent requirement, Riello UPS has invested in power solutions that meet strict demands; a commitment resulting in the launch of the Master HP UL range.
More than just an innovative and technologically-advanced UPS, it is a leap into the future of three-phase technology.
With its double conversion on-line technology based entirely on IGBT and digital signal processors (DSP), the Master HP UL range ensures maximum critical load protection, with VFI SS 111 classification (Voltage and Frequency Independent) in accordance with IEC EN 62040-3.
This range is designed using a new configuration that includes an IGBT sinusoidal input rectifier. Unique in its design, double conversion technology with galvanic isolated output guarantees a quality power supply that is completely protected from all electrical anomalies at the input.
Click + to open for details
Summary and Documents
Characteristics
ZERO IMPACT SOURCE
The Master HP UL series features the added advantages of the Zero Impact Source formula offered by an IGBT-based rectifier assembly. This eliminates problems connected with installation in networks with limited power capacity, where the UPS is supplied by a generator set or anywhere there are compatibility problems with loads that generate current harmonics. Master MHT UL series UPS have zero impact on the power supply source, whether it is a utility grid or generator set:
- Input current distortion < 3%
- Input power factor 0.99
- Power walk-in function that ensures progressive rectifier start up
- Start-up delay function, to restart the rectifiers when utility power is restored.
This provides savings in installation costs via:
- A smaller electrical infrastructure;
- Smaller circuit protection devices;
- Less wiring.
BATTERY CARE SYSTEM: MAXIMUM BATTERY CARE
Master HP UL series UPS include a range of features designed to prolong battery life and reduce usage by using different recharging methods; deep discharge protection, current limitation, and voltage compensation based on ambient temperature.
FLEXIBILITY
Master HP UL is suitable for a wide range of applications including IT and the most demanding industrial environments and processes. With several operational configurations including ON LINE, ECO, SMART ACTIVE, STANDBY, Frequency Converter and Voltage Regulation. A broad range of accessories and options, complex configurations and system architectures can be achieved to guarantee maximum power availability and the option to add new UPS without interruption to site operations.
MAIN FEATURES
- Compact size: e.g.: only 2.330 square inches for the Master HP UL 500 kVA;
- Reduced weight for transformer based UPS;
- Double load protection, both electronic and galvanic, towards the battery.
The entire Master HP UL range is suitable for use in a wide range of applications. The Master HP can supply any type of load, e.g. servers, controls, lighting, capacitive, switch mode. Power supply reliability and availability are ensured for critical applications by distributed parallel configurations of up to 8 units, for redundant (N+1) or power parallel configurations.
ADVANCED SUPERVISION
The Master HP UPS has a front panel mounted graphic display providing UPS information, measurements, status updates and alarms in multiple languages, with waveform displays including voltage/current and providing a kWh reading that can be used to measure IT loads and calculate a Data Centre PUE (Power Usage Effectiveness) ratio.
Documents
Master HP UL 100 Tech Specs (60 KiB)
Master HP UL 125 Tech Specs (62 KiB)
Master HP UL 160 Tech Specs (60 KiB)
Master HP UL 160-250kVA Drawing (2.3 MiB)
Master HP UL 160-250kVA Manual (2.8 MiB)
Master HP UL 200 Tech Specs (60 KiB)
Master HP UL 250 Tech Specs (59 KiB)
Master HP UL 300 Tech Specs (60 KiB)
Master HP UL 300-500kVA Drawing (4.4 MiB)
Master HP UL 300-500kVA Manual (6.0 MiB)
Master HP UL 400 Tech Specs (60 KiB)
Master HP UL 500 Tech Specs (60 KiB)
Master HP UL 65 Tech Specs (61 KiB)
Master HP UL 65-125kVA Drawing (1.4 MiB)
Master HP UL 65-125kVA Manual (1.6 MiB)
Master HP UL 65-500kVA Brochure (0.3 MiB)
Master HP UL 80 Tech Specs (60 KiB)
Master HP UL Battery Cabinet Manual (1.9 MiB)
Tech Specs
MHT 65 UL (65kVA, 58.5kW, 480V)
Models | MHT 65 UL |
---|---|
INPUT | |
Voltage | 480 V three-phase + N |
Frequency | 45 / 65 Hz |
Frequency tolerance | ±2% (selectable from ±1% to ±5% from front panel) |
Power factor | >0.99 |
Current distorsion | <3% THDi |
Soft start | 0 – 100% in 125” (selectable) |
OUTPUT and INVERTER OUTPUT | |
Rated power | 65000 VA |
Active power | 58500 W |
Number phases | 3 + N |
Crest factor (Ipeak/Irms) | 3:1 |
Waveform | Sinusoidal |
Static stability | ±1% |
Dynamic stability | from ±5% to ±1% in 20 msec. |
Frequency | 60 Hz |
Frequency on battery operation | 0.05% |
Frequency stability | 0.05% |
Overload | 110% for 60 min.; 125% for 10 min.; 150% for 1 min. |
RECTIFIER OUTPUT | |
Ripple | Zero |
BATTERIES | |
Type | VRLA, Wet Cell, NiCd |
ENVIRONMENTAL | |
Color | Black |
Remote controls | ESD and bypass (configurable) |
Communication | Double RS232 + dry contacts + 2 slots for communications interface with SNMP, Modbus, and Bacnet Protocols |
Protection rating | IP20 |
Marks | UL |
Other compliances | UL Standard 1778: 2nd ed. from 65 to 125 kVA, 5th ed. from 160 to 250 kVA; From 160 to 250 kVA: UL 60950-1 1 – Safety – Part 1: General National Electrical Code (NFPA-70); FCC Part 15 Subpart J class A – IEC 62040-3; UL 924 and OUST category |
Line-Interactive/Smart Active efficiency | up to 98.5% |
Noise | 65 dBA |
Remote signals | dry contacts (configurable) |
Operating temperature | 32 – 104 °F / 0 – 40 °C |
Relative humidity | <95% non-condensing |
Transport | Pallet jack |
DATA | |
Weight | 1500 lbs / 680 kg |
Dimensions (h w d) | 75 x 31.50 x 33.50 inches / 1900 x 800 x 850 mm |
MHT 80 UL (80kVA, 72kW, 480V)
Models | MHT 80 UL |
---|---|
INPUT | |
Voltage | 480 V three-phase + N |
Frequency | 45 / 65 Hz |
Frequency tolerance | ±2% (selectable from ±1% to ±5% from front panel) |
Power factor | >0.99 |
Current distorsion | <3% THDi |
Soft start | 0 – 100% in 125” (selectable) |
OUTPUT and INVERTER OUTPUT | |
Rated power | 80000 VA |
Active power | 72000 W |
Number phases | 3 + N |
Crest factor (Ipeak/Irms) | 3:1 |
Waveform | Sinusoidal |
Static stability | ±1% |
Dynamic stability | from ±5% to ±1% in 20 msec. |
Frequency | 60 Hz |
Frequency stability | 0.05% |
Overload | 110% for 60 min.; 125% for 10 min.; 150% for 1 min. |
RECTIFIER OUTPUT | |
Ripple | Zero |
BATTERIES | |
Type | VRLA, Wet Cell, NiCd |
ENVIRONMENTAL | |
Color | Black |
Remote controls | ESD and bypass (configurable) |
Communication | Double RS232 + dry contacts + 2 slots for communications interface with SNMP, Modbus, and Bacnet Protocols |
Protection rating | IP20 |
Marks | UL |
Other compliances | UL Standard 1778: 2nd ed. from 65 to 125 kVA, 5th ed. from 160 to 250 kVA; From 160 to 250 kVA: UL 60950-1 1 – Safety – Part 1: General National Electrical Code (NFPA-70); FCC Part 15 Subpart J class A – IEC 62040-3; UL 924 and OUST category |
Line-Interactive/Smart Active efficiency | up to 98.5% |
Noise | 65 dBA |
Remote signals | dry contacts (configurable) |
Operating temperature | 32 – 104 °F / 0 – 40 °C |
Relative humidity | <95% non-condensing |
Transport | Pallet jack |
DATA | |
Weight | 1500 lbs / 680 kg kg |
Dimensions (h w d) | 75 x 31.50 x 33.50 inches / 1900 x 800 x 850 mm |
MHT 100 UL (100kVA, 90kW, 480V)
Models | MHT 100 UL |
---|---|
INPUT | |
Voltage | 480 V three-phase + N |
Frequency | 45 / 65 Hz |
Frequency tolerance | ±2% (selectable from ±1% to ±5% from front panel) |
Power factor | >0.99 |
Current distorsion | <3% THDi |
Soft start | 0 – 100% in 125” (selectable) |
OUTPUT and INVERTER OUTPUT | |
Rated power | 100000 VA |
Active power | 90000 W |
Number phases | 3 + N |
Crest factor (Ipeak/Irms) | 3:1 |
Waveform | Sinusoidal |
Static stability | ±1% |
Dynamic stability | from ±5% to ±1% in 20 msec. |
Frequency | 60 Hz |
Frequency stability | 0.05% |
Overload | 110% for 60 min.; 125% for 10 min.; 150% for 1 min. |
RECTIFIER OUTPUT | |
Ripple | Zero |
BATTERIES | |
Type | VRLA, Wet Cell, NiCd |
ENVIRONMENTAL | |
Color | Black |
Remote controls | ESD and bypass (configurable) |
Communication | Double RS232 + dry contacts + 2 slots for communications interface with SNMP, Modbus, and Bacnet Protocols |
Protection rating | IP20 |
Marks | UL |
Other compliances | UL Standard 1778: 2nd ed. from 65 to 125 kVA, 5th ed. from 160 to 250 kVA; From 160 to 250 kVA: UL 60950-1 1 – Safety – Part 1: General National Electrical Code (NFPA-70); FCC Part 15 Subpart J class A – IEC 62040-3; UL 924 and OUST category |
Line-Interactive/Smart Active efficiency | up to 98.5% |
Noise | 65 dBA |
Remote signals | dry contacts (configurable) |
Operating temperature | 32 – 104 °F / 0 – 40 °C |
Relative humidity | <95% non-condensing |
Transport | Pallet jack |
DATA | |
Weight | 1610 lbs / 730 kg |
Dimensions (h w d) | 75 x 31.50 x 33.50 inches / 1900 x 800 x 850 mm |
MHT 125 UL (125kVA, 112.5kW, 480V)
Models | MHT 125 UL |
---|---|
INPUT | |
Voltage | 480 V three-phase + N |
Frequency | 45 / 65 Hz |
Frequency tolerance | ±2% (selectable from ±1% to ±5% from front panel) |
Power factor | >0.99 |
Current distorsion | <3% THDi |
Soft start | 0 – 100% in 125” (selectable) |
OUTPUT and INVERTER OUTPUT | |
Rated power | 125000 VA |
Active power | 112500 W |
Number phases | 3 + N |
Crest factor (Ipeak/Irms) | 3:1 |
Waveform | Sinusoidal |
Static stability | ±1% |
Dynamic stability | from ±5% to ±1% in 20 msec. |
Frequency | 60 Hz |
Frequency stability | 0.05% |
Overload | 110% for 60 min.; 125% for 10 min.; 150% for 1 min. |
RECTIFIER OUTPUT | |
Ripple | Zero |
OVERLOAD TIMES | |
100% < Load < 120% | ‘ |
BATTERIES | |
Type | VRLA, Wet Cell, NiCd |
ENVIRONMENTAL | |
Color | Black |
Remote controls | ESD and bypass (configurable) |
Communication | Double RS232 + dry contacts + 2 slots for communications interface with SNMP, Modbus, and Bacnet Protocols |
Protection rating | IP20 |
Marks | UL |
Other compliances | UL Standard 1778: 2nd ed. from 65 to 125 kVA, 5th ed. from 160 to 250 kVA; From 160 to 250 kVA: UL 60950-1 1 – Safety – Part 1: General National Electrical Code (NFPA-70); FCC Part 15 Subpart J class A – IEC 62040-3; UL 924 and OUST category |
Line-Interactive/Smart Active efficiency | up to 98.5% |
Noise | 68 dBA |
Remote signals | dry contacts (configurable) |
Operating temperature | 32 – 104 °F / 0 – 40 °C |
Relative humidity | <95% non-condensing |
Transport | Pallet jack |
DATA | |
Weight | 1742 lbs / 790 kg |
Dimensions (h w d) | 75 x 31.50 x 33.50 inches / 1900 x 800 x 850 mm |
MHT 160 UL (160kVA, 144kW, 480V)
Models | MHT 160 UL |
---|---|
INPUT | |
Voltage | 480 V three-phase + N |
Frequency | 45 / 65 Hz |
Frequency tolerance | ±2% (selectable from ±1% to ±5% from front panel) |
Power factor | > 0.99 |
Current distorsion | <3% THDi |
Soft start | 0 – 100% in 125” (selectable) |
OUTPUT and INVERTER OUTPUT | |
Rated power | 160000 VA |
Active power | 144000 W |
Number phases | 3 + N |
Crest factor (Ipeak/Irms) | 3:1 |
Waveform | Sinusoidal |
Static stability | ±1% |
Dynamic stability | from ±5% to ±1% in 20 msec. |
Frequency | 60 Hz |
Frequency stability | 0.05% |
Overload | 110% for 60 min.; 125% for 10 min.; 150% for 1 min. |
RECTIFIER OUTPUT | |
Ripple | Zero |
BATTERIES | |
Type | VRLA, Wet Cell, NiCd |
ENVIRONMENTAL | |
Color | Black |
Remote controls | ESD and bypass (configurable) |
Communication | Double RS232 + dry contacts + 2 slots for communications interface with SNMP, Modbus, and Bacnet Protocols |
Protection rating | IP20 |
Marks | UL |
Other compliances | UL Standard 1778: 2nd ed. from 65 to 125 kVA, 5th ed. from 160 to 250 kVA; From 160 to 250 kVA: UL 60950-1 1 – Safety – Part 1: General National Electrical Code (NFPA-70); FCC Part 15 Subpart J class A – IEC 62040-3; UL 924 and OUST category |
Line-Interactive/Smart Active efficiency | up to 98.5% |
Noise | 68 dBA |
Remote signals | dry contact (configurable) |
Operating temperature | 32 – 104 °F / 0 – 40 °C |
Relative humidity | <95% non-condensing |
Transport | Pallet jack |
DATA | |
Weight | 2204 lbs / 1000 kg |
Dimensions (h w d) | 75 x 55 x 33.50 inches / 1900 x 1400 x 850 mm |
MHT 200 UL (200kVA, 180kW, 480V)
Models | MHT 200 UL |
---|---|
INPUT | |
Voltage | 480 V three-phase + N |
Frequency | 45 / 65 Hz |
Frequency tolerance | ±2% (selectable from ±1% to ±5% from front panel) |
Power factor | >0.99 |
Current distorsion | <3% THDi |
Soft start | 0 – 100% in 125” (selectable) |
OUTPUT and INVERTER OUTPUT | |
Rated power | 200000 VA |
Active power | 180000 W |
Number phases | 3 + N |
Crest factor (Ipeak/Irms) | 3:1 |
Waveform | Sinusoidal |
Static stability | ±1% |
Dynamic stability | from ±5% to ±1% in 20 msec. |
Frequency | 60 Hz |
Frequency stability | 0.05% |
Overload | 110% for 60 min.; 125% for 10 min.; 150% for 1 min. |
RECTIFIER OUTPUT | |
Ripple | Zero |
BATTERIES | |
Type | VRLA, Wet Cell, NiCd on Racks or Cabinet |
ENVIRONMENTAL | |
Color | Black |
Remote controls | ESD and bypass (configurable) |
Communication | Double RS232 + dry contacts + 2 slots for communications interface |
Protection rating | IP20 |
Marks | UL |
Other compliances | UL Standard 1778: 5th ed; UL 60950-1 1 – Safety – Part 1: General National Electrical Code (NFPA-70); FCC Part 15 Subpart J class A – IEC 62040-3; UL 924 and OUST category |
Line-Interactive/Smart Active efficiency | up to 98.5% |
Noise | 68 dBA |
Remote signals | dry contacts (configurable) |
Operating temperature | 32 – 104 °F / 0 – 40 °C |
Relative humidity | <95% non-condensing |
Transport | Pallet jack |
DATA | |
Weight | 2524 lbs / 1145 kg |
Dimensions (h w d) | 75 x 55 x 33.5 inches / 1900 x 1400 x 850 mm |
MHT 250 UL (250kVA, 225kW, 480V)
Models | MHT 250 UL |
---|---|
INPUT | |
Voltage | 480 V three-phase + N |
Frequency | 45 / 65 Hz |
Frequency tolerance | ±2% (selectable from ±1% to ±5% from front panel) |
Power factor | > 0.99 |
Current distorsion | <3% THDi |
Soft start | 0 – 100% in 125’’ (selectable) |
OUTPUT and INVERTER OUTPUT | |
Rated power | 250000 VA |
Active power | 225000 W |
Number phases | 3 + N |
Crest factor (Ipeak/Irms) | 3:1 |
Waveform | Sinusoidal |
Static stability | ±1% |
Dynamic stability | from ±5% to ±1% in 20 msec. |
Frequency | 60 Hz |
Frequency stability | 0.05% |
RECTIFIER OUTPUT | |
Ripple | Zero |
BATTERIES | |
Type | VRLA, Wet Cell, NiCd on Racks or Cabinet |
ENVIRONMENTAL | |
Color | Black |
Remote controls | ESD and bypass (configurable) |
Communication | Double RS232 + dry contacts + 2 slots for communications interface |
Protection rating | IP20 |
Marks | UL |
Other compliances | UL Standard 1778: 5th ed; UL 60950-1 1 – Safety – Part 1: General National Electrical Code (NFPA-70); FCC Part 15 Subpart J class A – IEC 62040-3; UL 924 and OUST category |
Line-Interactive/Smart Active efficiency | up to 98.5% |
Noise | 68 dBA |
Remote signals | dry contacts (configurable) |
Operating temperature | 32 – 104 °F / 0 – 40 °C |
Relative humidity | <95% non-condensing |
Transport | Pallet Jack |
DATA | |
Weight | 2799 lbs / 1270 kg |
Dimensions (h w d) | 75 x 55 x 33.5 inches / 1900 x 1400 x 850 mm |
MHT 300 UL (300kVA, 300kW, 480V)
Models | MHT 300 UL |
---|---|
INPUT | |
Voltage | 480 V three-phase + N |
Frequency | 45 / 65 Hz |
Frequency tolerance | ±2% (selectable from ±1% to ±5% from front panel) |
Power factor | > 0.99 |
Current distorsion | <3% THDi |
Soft start | 0 – 100% in 125’’ (selectable) |
OUTPUT and INVERTER OUTPUT | |
Rated power | 300000 VA |
Active power | 300000 W |
Number phases | 3 + N |
Crest factor (Ipeak/Irms) | 3:1 |
Waveform | Sinusoidal |
Static stability | ±1% |
Dynamic stability | from ±5% to ±1% in 20 msec. |
Frequency | 60 Hz |
Frequency stability | 0.05% |
Overload | 110% for 60 min.; 125% for 10 min.; 150% for 1 min. |
RECTIFIER OUTPUT | |
Ripple | Zero |
BATTERIES | |
Type | VRLA, Wet Cell, NiCd on Racks or Cabinet |
ENVIRONMENTAL | |
Color | Black |
Remote controls | ESD and bypass (configurable) |
Communication | Double RS232 + dry contacts + 2 slots for communications interface |
Protection rating | IP20 |
Marks | UL |
Other compliances | UL Standard 1778: 5th edition; UL 60950-1 1: Information Technology Equipment – Safety – Part 1: General Requirements; National Electrical Code (NFPA-70); FCC Part 15 Subpart J class A – Radio Frequency; IEC 62040-3; UL 924 and OUST category |
Line-Interactive/Smart Active efficiency | up to 98.5% |
Noise | 72 dBA |
Remote signals | dry contacts (configurable) |
Operating temperature | 32 – 104 °F / 0 – 40 °C |
Relative humidity | <95% non-condensing |
Transport | Pallet jack |
DATA | |
Weight | 4961 lbs / 2250 kg |
Dimensions (h w d) | 75 x 75x 39.5 inches / 1900 x 1900 x 1000 mm |
MHT 400 UL (400kVA, 400kW, 480V)
Models | MHT 400 UL |
---|---|
INPUT | |
Voltage | 480 V three-phase + N |
Frequency | 45 / 65 Hz |
Frequency tolerance | ±2% (selectable from ±1% to ±5% from front panel) |
Power factor | > 0.99 |
Current distorsion | <3% THDi |
Soft start | 0 – 100% in 125’’ (selectable) |
OUTPUT and INVERTER OUTPUT | |
Rated power | 400000 VA |
Active power | 400000 W |
Number phases | 3 + N |
Crest factor (Ipeak/Irms) | 3:1 Ipeack/Irms |
Waveform | Sinusoidal |
Static stability | ±1% |
Dynamic stability | from ±5% to ±1% in 20 msec. |
Frequency | 60 Hz |
Frequency stability | 0.05% |
Overload | 110% for 60 min.; 125% for 10 min.; 150% for 1 min. |
RECTIFIER OUTPUT | |
Ripple | Zero |
BATTERIES | |
Type | VRLA, Wet Cell, NiCd on Racks or Cabinet |
ENVIRONMENTAL | |
Color | Black |
Remote controls | ESD and bypass (configurable) |
Communication | Double RS232 + dry contacts + 2 slots for communications interface |
Protection rating | IP20 |
Marks | UL |
Other compliances | UL Standard 1778: 5th edition; UL 60950-1 1: Information Technology Equipment – Safety – Part 1: General Requirements; National Electrical Code (NFPA-70); FCC Part 15 Subpart J class A – Radio Frequency; IEC 62040-3; UL 924 and OUST category |
Line-Interactive/Smart Active efficiency | up to 98.5% |
Noise | 72 dBA |
Remote signals | Dry contact (configurable) |
Operating temperature | 32 – 104 °F / 0 – 40 °C |
Relative humidity | <95% non-condensing |
Transport | Pallet jack |
DATA | |
Weight | 4961 lbs / 2250 kg |
Dimensions (h w d) | 75 x 75 x 39.5 inches / 1900 x 1900 x 1000 mm |
MHT 500 UL (500kVA, 450kW, 480V)
Models | MHT 500 UL |
---|---|
INPUT | |
Voltage | 480 V three-phase + N |
Frequency | 45 / 65 Hz |
Frequency tolerance | ±2% (selectable from ±1% to ±5% from front panel) |
Power factor | >0.99 |
Current distorsion | <3% THDi |
Soft start | 0 – 100% in 125’’ (selectable) |
OUTPUT and INVERTER OUTPUT | |
Rated power | 500000 VA |
Active power | 450000 W |
Number phases | 3 + N |
Crest factor (Ipeak/Irms) | 3:1 |
Waveform | Sinusoidal |
Static stability | ±1% |
Dynamic stability | from ±5% to ±1% in 20 msec. |
Frequency | 60 Hz |
Frequency stability | 0.05% |
Overload | 110% for 60 min.; 125% for 10 min.; 150% for 1 min. |
RECTIFIER OUTPUT | |
Ripple | Zero |
BATTERIES | |
Type | VRLA, Wet Cell, NiCd on Racks or Cabinet |
ENVIRONMENTAL | |
Color | Black |
Remote controls | ESD and bypass (configurable) |
Communication | Double RS232 + dry contacts + 2 slots for communications interface |
Protection rating | IP20 |
Marks | UL |
Other compliances | UL Standard 1778: 5th edition; UL 60950-1 1: Information Technology Equipment – Safety – Part 1: General Requirements; National Electrical Code (NFPA-70); FCC Part 15 Subpart J class A – Radio Frequency; IEC 62040-3; UL 924 and OUST category |
Line-Interactive/Smart Active efficiency | up to 98.5% |
Noise | 72 dBA |
Remote signals | dry contacts (configurable) |
Operating temperature | 32 – 104 °F / 0 – 40 °C |
Relative humidity | <95% non-condensing |
Transport | Pallet jack |
DATA | |
Weight | 4961 lbs / 2250 kg |
Dimensions (h w d) | 75 x 75 x 39.5 inches / 1900 x 1900 x 1000 mm |