The LP 11 Series by GE
Easy to install and maintain, and versatile enough to accommodate office environments as well as more-demanding commercial and industrial ones, the LP 11 Series by GE is a true-voltage, frequency-independent, double conversion, online UPS system designed to provide the highest level of protection for all critical loads against all utility variances and failure.
Highly scalable, the GE proprietary redundant parallel architecture allows you to parallel up to four units as increasing business growth might require, as well as simultaneously enhancing total system reliability, and eliminating the possibility of single points of failure.
Ergonomically designed LCD interface provides clear status data, functions as a service screen to adjust UPS parameters, and includes a comprehensive event log. Integrated transformer ensures galvanic isolation on the output for ultimate safe installation. Available with optional matching battery cabinets to extend runtime, the LP 11 Series comes with a comprehensive warranty.
Features & Benefits
- High efficiency at all loads
- Can operate between 0°C to 40°C
- Advanced battery protection
- Hot-swappable batteries
- Regular automatic battery test
- Short circuit and overload protection
- Cold start
- 50/60 auto-sensing—can be used as a frequency converter
- Energy-saving eco-friendly 95 percent efficiency
- At-a-glance LED display of system status
Product Scope
| Single Phase Output Voltages | 120/208/230/240V |
| Wide input voltage window | Minimizes battery use, prolongs battery life |
| RPA functionality for paralleling and redundancy | UPS capacity can be increased as site requirements require at no extra cost |
| Internal automatic bypass switch | Continuous power supply to the load even if the UPS is overloaded |
| 0.8 output power factor | Prevents the need to oversize the UPS |
| 0.99 input power factor | |
| Manual automatic bypass switch | Integrated as standard to the rear of the UPS |
| GE’s unique Superior Battery Management | Ultimate protection for the UPS core component |
| High efficiency 91% – 94% (model dependent) | Using ECO mode, high efficiency and low losses |
| No load shutdown | Prevents deep battery discharge al low loads |
| Frequency conversion 50/60Hz | Operates as a frequency converter also operating in a parallel system |
Technical Specs
| GE LP-11U Series UPS (5kVA-10kVA) Technical Specifications | ||||||
|---|---|---|---|---|---|---|
| MODEL NUMBER | LP11U-5 | LP11U-5 (120) | LP11U-6 | LP11U-6 (120V) | LP11U-8 | LP11U-10 |
| Rating (VA/W) | 5000 / 4000 | 5000 / 4000 | 6000 / 4800 | 6000 / 4800 | 8000 / 6400 | 10,000 / 8000 |
| Backup Time @ 50% / 100% loads | 25 / 10 min. | 25 / 10 min. | 20 / 8 min. | 20 / 8 min. | 29 / 11 min. | 22 / 8 min. |
| Enclosure (Table 1) | A | B | A | B | A | A |
| Net Wgt Incl. Batteries (kg/lbs) | 134/295 | 175/386 | 134/295 | 175/386 | 175/386 | 186/410 |
| Input Voltage (VAC) | ||||||
| Nominal | 208 | 120 | 208 | 120 | 208 | 208 |
| Range @ 100% Load (V) | 162-285 | 81-141 | 162-285 | 81-141 | 162-285 | 162-285 |
| Range @ 50% Load (V) | 146-285 | 72-141 | 146-285 | 72-141 | 146-285 | 146-285 |
| Input Power Factor | .99 | |||||
| Input Frequency (Hz) | 40-70 | |||||
| Output Power Factor | .8 | |||||
| Output Voltage (VAC) (sinusoidal) | 120+208+220/230/240 User Selectable | |||||
| Output Frequency (Hz) | 50/60 | |||||
| Output Voltage Regulation | +/- 1% | |||||
| Output THD at Linear Load | <1% | |||||
| Output THD at Non-linear Load | <2% | |||||
| Crest Factor Handling Capacity of a Non-linear Load | 5:1 | |||||
| Overload Capability on Inverter | 110% 20 min., 130% 3.5 min., 150% 2 min. | |||||
| Color | Front bezel: Aluminum Grey (RAL9006); Cabinet: Pure White (RAL9010) | |||||
| Environment | IP20 (IEC 60529) | |||||
| Operating Temperature / Humidity | 32° F – 104° F (0° C – 40° C) / 95% Non-condensing | |||||
| Audible Noise | 40-50 dBA – 3.3 feet (1 meter) | |||||
| Safety Classifications & Listings | UL, cUL 1778; CE: EN50091-1-1; EN 60950; IEC 950 | |||||
| EMI | FCC Part 15 Class A / EN50091-2 | |||||
| Surge Protection | IEC 1000-4-5 (6kV 1.2/50 μsec – 3kA 8/20 μsec) IEEE 587 B, EN 50091-2 | |||||
| Connectivity | RS-232; programmable alarm contacts (optional); SNMP (optional) | |||||
| Warranty | 24 Months | |||||
1. Due to continuous product improvements, program specifications are subject to change without notice.
Industries & Applications
- Hospitals, clinics, medical centers
- Government & business offices
- Police & fire emergency call centers
- Military applications
- “Lights-out” or “dark factory” manufacturing
- Large data centers or IT systems
- Critical network switching & processing equipment
- Large-scale PLC controls
We respect your privacy and will never share your email address with anyone without your explicit permission.
