The 1600 Series is tower-design, double-conversion online industrial UPS system or commercial UPS system that can supply clean, uninterrupted power to mission-critical loads over large input voltage deviations—without resorting to battery backup. Wide input voltage and frequency windows maximize generator compatibility. Input power factor is greater than 95 percent with an output power factor of 85 percent. LCD touch-screen display for easy UPS monitoring and control. Options include network interface card (RemotEye® II) environmental monitoring device. Available in 3.6, 6.0, 8.0, 10.0, 14, 18, and 22 KVA.

Features & Benefits

  • Digital LCD touchscreen display
  • Hot swappable batteries
  • Internal isolation transformer
  • Wide input voltage & frequency windows
  • Input power factor > 95 percent
  • Power factor correction
  • Output power factor 85 percent
  • Optional network interface card for remote monitoring/control
  • Optional external battery cabinets
  • Optional environmental monitoring device

Request a quote

 

Technical Specs

1600XP/XPi Specifications Spreadsheet
Capacity
3.6 KVA
(3.1 KW)
6 KVA
(5.1 KW)
8 KVA
(6.8 KW)
10 KVA
(8.5 KW)
14 KVA
(11.9 KW)
18 KVA
(15.3 KW)
22 KVA
(18.7 KW)
Topology
True On-Line, Double Conversion; IGBT Power Factor Corrected Input; Internal Isolation Transformer
Certifications
UL 1778, CUL, CE, FCC Class A, IEEE 587, ANSI/C62.41, ISO 9001, ISO 14001, NEMA/PE1-1993, RoHs
Input Characteristics
Input Voltage
(Based on Typical 70% Load)
Single-Phase 208/240 VAC (Three-Wire Input/L-L, G); 230 VAC (Three-Wire Input/L, N, G), +10% -30%
Input Frequency
45 to 65 Hz (Auto-Sensing)
Input Power Factor
> 0.95 For All Loads
Input Current THD
< 5% (Even for 100% Non-Linear Loads)
AC Input Breaker Rating
30 A
50 A
60 A
63 A
100 A
100 A
125 A
Battery Characteristics
Battery Type
Valve-Regulated Lead Acid; Flame Retardant (9.0 Amp Hr)
Backup Time (Fully Charged)
7 Minutes
7 Minutes
7 Minutes
5 Minutes
7 Minutes
5 Minutes
3 Minutes
0.85 Power Factor; 77° F; Approximately 30% More Runtime for Output Power Factor of 0.7 (Triple Backup Time at ½ Load)
Recharge Time
24 Hours (Full), 12 Hours (90%)
DC Link
144 VDC
216 VDC
288 VDC
Output Characteristics
Output Voltage
Single-Phase 240/208/120 VAC (Four-Wire Output/L-L, N, G) 230 VAC (Three-Wire Output L, N, G)
Output Voltage Regulation
3%; ±1% Typical
Output Frequency
50/60 Hz; ±0.5 Hz/1.0 Hz/1.5 Hz (Factory or Authorized Service Center Selectable)
Output Voltage THD
< 3% for Linear Load; 1% Typical
Common Mode Noise
< 0.5 V RMS
Rated-Load Power Factor
0.85 (0.6 to 1.0) Lag
Rated Output Current @ 240 V
15 A
25 A
33.3 A
41.6 A
58 A
75A
91.6 A
Maximum Peak Output Current
45 A
75 A
100 A
125 A
174 A
225 A
275 A
Overload Capacity
Inverter Mode: 150% for 10 Seconds, 125% for 30 seconds; Bypass Mode: 125% for 10 Minutes, 1000% for One Cycle
Environmental Characteristics
Efficiency (AC-DC-AC)
> 85%
Temperature Range
0 to 40°C (Operating); -20° to +40°C (Storage)
Heat Generation (BTU/Hr)
1843
3071
4095
5118
7168
9213
11,260
Altitude
6600 Feet (2000 Meters) Maximum Without Derating
Audible Noise
< 60 DBA @ 1 Meter
Mechanical Design
Enclosure
Steel Enclosure; Complies with NEMA 1 and UL Type-1 Standard
Enclosure Dimensions (HxWxD)
22.1″ x 10″ x 33″
27.5″ x 10″ x 33″
28.4″ x 13″ x 34.9″
39.1″ x 17.5″ x 36.1″
Shipping Weight
280 lb/127 kg
346 lb/157 kg
476 lb/214 kg
784 lb/355 kg
784 lb/355 kg
835 lbs/379 kg
Battery Pack Size (HxWxD)
5″ x 7.3″ x 19″ (Battery Pack Part # 51896-FS)
Battery Pack Quantity
Two
Three
Four
Eight
Additional Key Features
Output Isolation Transformer, RS232 & Dry Contact Interface, Crest Factor of 3, Angled Terminal Blocks for Easy Installation, Casters for Mobility
Options
SNMP & WEB-Based Monitoring
RemotEye® III, RemotEye® 4, RemotRadar™, & Environmental Monitoring Device
Matching Battery Cabinet
Consult Factory
Internal/External Maintenance Bypass
Consult Factory
Receptacle Panel & Line Cord
Consult Factory
Warranty
Three Years on Electronics (UPS); Two Years on Battery (See Toshiba Warranty Policy for Full Details)

 

Industries & Applications

  • Industrial Systems
  • Health Care
  • Laboratories
  • Small Business Offices
  • Point-of Sale Equipment
  • Internet Service Provider
  • Server Consolidation
  • Datacenters
  • Storage
  • Wiring Closets

 

Request a Quote

Request a Quote from N1 Critical Technologies
  • Thank you for your interest on N1 Critical Technologies Inc. To contact us via email, please complete the form below and our representative will contact you. Our mailing address is 2949 Venture Drive, Suite 108 Janesville, WI 53546. Our telephone number is (855)-665-3829.

We respect your privacy and will never share your email address with anyone without your explicit permission.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *